Product Overview
The XPS 16K power amplifier boasts advanced processing and analog/digital routing options, making it suitable for both touring and install use. Its compact 2U chassis packs a punch with 4x4000 W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing. Whether you're setting up a touring sound system or an installed one, the XPS 16K is the perfect choice for high-performance speakers, with its readily available configurations and presets. Additionally, it offers advanced tuning capabilities for linear mode use.
Each output of the XPS 16K features a suite of professional-grade tools, including 4000 ms output delay (1372 m / 4501 ft), EQ Filters, Crossovers, FIR Filters, Multiband Compressor, RMS Limiter, and Thermal Limiter. It's designed to deliver premium sound quality with full RDNet remote management, a large onboard touch interface, exceptional signal/noise ratio, ultra-low distortion, and an extreme dynamic range. The XPS 16K's rider-friendly features make it a top choice for sound professionals who demand the best in their audio equipment.
RCF XPS 16K Features:
- 16000 W Total Continuous Power
- 40-bit Floating-point Processing, up to 96 kHz
- 32-bit Fixed-point Internal Routing
- FiRPHASE, Bass Motion Control, Bass Shaper
- RDNet Networked Management
- Touch 4.3" Color TFT Interface
- Full On-board Processing with Delay, EQ, Comp/Limiter
- RCF Speaker Presets Library
RCF XPS 16K Specifications:
- AMPLIFIER SPECIFICATIONS
- Amplifier Class: D
- Output power (EIAJ 8:32 all channels driven):
- (4) 4000 W @ 2.7 ohm
- (4) 2600 W @ 4 ohm
- (4) 1400 W @ 8 ohm
- Frequency Response (-3dB): 20 Hz ÷ 23000 Hz
- SNR Analog inputs (unweighted): >111 dB
- SNR Digital inputs (unweighted): >115 dB
- Crosstalk:
- THD+N (20 Hz ÷ 20000 Hz,1000 W @ 4 ohm):
- Gain (linear mode @ 0 dB): 32 dB
- Damping factor (@ 4 ohm, 20 Hz ÷ 1500 Hz): >95
- Max burst length (@ 50 Hz, CF = 7 dB, 4 ohm, 1% THD+N): 200 ms
- INPUT SECTION
- Total number of inputs: 8
- Line inputs: 4
- Line connectors: XLR
- Digital inputs: 4
- Digital connectors: XLR
- Digital type: AES/EBU
- General Purpose Inputs (GPI): 2
- Programmable GPI: Yes
- Photo-coupled GPI: 2
- OUTPUT SECTION
- Signal output number: 4
- Signal output connectors: XLR
- Power output connectors: Speakon
- General Purpose Outputs (GPO): 3
- Programmable GPO: Yes
- PROCESSING
- DSP:
- 2 SHARC, 40-bit floating point, 96 kHz
- 2 ADAU 1442, 32-bit fixed point, 96 kHz
- EQ Filters: Peaking | HI/LO-shelving | HI/LO-pass (Butterworth, Linkwitz-Riley, Bessel)
- Advanced algorithms: FiRPHASE technology | BASS shaper | air compensation | mid-low correction | driver excursion control | dynamic PEQ | multi-band compressor | pilot tone detection | backup recovery strategy | impedance load measurement
- Compressors: RMS limiter | dynamic compressor | power limiter | thermal compressor
- Delay: 0 ÷ 4000 ms (each channel)
- Tone controls: Yes
- High-pass filter: 10 Hz ÷ 1000 Hz
- Crossover: 2500 ÷ 3500 Hz
- Automatic gain control: Yes
- CONFIGURATION AND CONTROL
- Configuration: Front panel touch screen, PC Software
- Network: Gigabit ethernet
- RCF speakers presets: Yes
- Priority: Yes
- Protocols for system integration: Proprietary OSC based protocol, Q-SYS
- RDNet: Yes
- PROTECTIONS
- Cooling: Forced
- Short circuit: Yes
- Thermal: Yes
- DC: Yes
- Fuses: Yes
- VHF (Very High Frequencies): Yes
- OPERATING CONDITIONS
- Temperature range - Continuous operation: -5°C ÷ +40°C / +23°F ÷ +104°F
- Temperature range - Reduced output power: -5°C to +50°C / +23°F to +122°F
- Fan noise idle < (dBA):
- Fan noise max < (dBA):
- POWER REQUIREMENT
- Operating voltage: 90-240 V~ 50/60 Hz
- Nominal current AC @ 100-120 V: 30 A
- Nominal current AC @ 220-240 V: 16 A
- Stand by power consumption: 20 W
- Idle power consumption: 90 W
- Power consumption (MAX): 5800 W
- Main fuse: Internal
- STANDARD COMPLIANCE
- Safety agency: CE compliant
- PHYSICAL SPECIFICATIONS
- Cabinet/Case Material:Metal
- Handles: 2 metal handles for rack mount
- Color: Black - RAL 9005
- Rack mounting: 19", 2U
- SIZE
- Height: 88.7 mm / 3.49 inches
- Width: 482 mm / 18.98 inches
- Depth: 482.4 mm / 18.99 inches
- Weight: 15 kg / 33.07 lbs
- SHIPPING INFORMATION
- Package Height: 150 mm / 5.91 inches
- Package Width: 580 mm / 22.83 inches
- Package Depth: 600 mm / 23.62 inches
- Package Weight: 18 kg / 39.68 lbs