Product Overview
The VLA-C265 leverages JBL's advanced technology, featuring a high-frequency section with three D2415 drivers for optimal sensitivity and control, and a low-frequency section with dual 10” Differential Drive® drivers. The durable enclosure includes reinforced fiberglass and steel, with a zinc-plated, powder-coated grille and waterproofing features. It comes with an integrated rigging system for easy assembly and angle adjustments, plus additional accessories like a rigging frame and cardioid kit for precise sound directionality.
JBL VLA-C265-BK Includes:
- (2) pcs. VLA-C265 Bracket Plates
- (8) pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates
- (2) pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via
- (4) pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts.
JBL VLA-C265-BK Features:
- Compact line array module optimized for permanent install applications
- Advanced technology component transducers for low weight and high output
- Outdoor IP55 rated enclosure for protection from dust and water
- Comprehensive rigging points for creating a line array configuration
- Fiberglass box construction and weatherized components
- Can be bi-amplified for maximum SPL, or fed passively for reduced amplification costs
- 65° horizontal coverage pattern
JBL VLA-C265-BK Specifications:
- Frequency Range (-10dB): 85 Hz - 19 kHz
- Frequency Response (±3 dB): 108 Hz – 16.5 kHz
- Full Range: 800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs
- Bi-amp LF: 800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs
- Bi-amp HF: 150 W Continuous Pink Noise (600 W peak), 2 hrs 50 W Continuous Pink Noise (200 W peak), 100 hrs
- Full-Range: 80 V Rms (2 hrs), 160 V peak
- Maximum SPL (1m): 131 dB Cont. Ave (2 hrs), 137 dB Peak
- Coverage Pattern (-6 dB): Horizontal: 65° (+15°/-10°, 1.5 kHz to 15 kHz) Vertical: Varies with array size and configuration
- Amplifiers: Crown DCi Family with DSP on-boardRecommended:Crown DCi 2 | 1250NCrown DCi 4 | 1250N/ND/DACrown DCi 2 | 2400NCrown DCi 4 | 2400N
- LF Driver: 2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
- HF Driver: 3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit
- Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
- Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
- Inter-Enclosure Angles: VLA-C265 to VLA-C265: 1.5°, 2.4° 3.8°, 6.0°, 9.5° using VLA-C265 Bracket Plate (included with VLA-C265)VLA-C265 to VLA-C2100 (either model on top/bottom): 1.9°, 3.0° using VLA-C2100 Bracket Plate (included with VLA-C2100) and 4.7°, 7.5°, 11.9° using VLA-C265 Bracket Plate (included with VLA-C265)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)
- Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water).
- Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers.
- Colors: -GR: Gray (similar to Pantone 420C), -BK: Black
- Dimensions (H x W x D): 381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in)
- Net Weight (each): 37.7 kg (83 lbs)
- Shipping Weight (ea): 44.0 kg (97 lbs)