Product Overview
Whether you're a presenter or a performer, Shure's dropout-free GLXD+ Dual Band Digital Wireless lets you take the stage with total confidence, providing rock-solid performance so you can focus on your message. The GLXD14+/85 includes a tabletop receiver, bodypack transmitter, and WL185 cardioid lavalier microphone that delivers clear, intelligible vocal capture and good ambient noise rejection. With its advanced Dual Band Wireless Technology, GLXD+ operates in the license-free 2.4 and 5.8GHz ranges, providing more than double the available bandwidth and intelligently avoiding interference. The GLXD14+/85 is a tabletop system that's easy to set up and operate thanks to auto-pairing and Smart frequency management. The transmitter features a twelve-hour runtime battery making power concerns a thing of the past. Of course, things don't always go as planned. So Shure engineered the SB904 battery to deliver a 1.5-hour runtime from a 15-minute quick charge. And you have options because the SB904 can be recharged in the receiver's front panel or via USB-C while still in the transmitter. Get your GLXD14+/85 today and experience the freedom!
Shure GLXD14+/85 Applications:
- Corporate presentations
- Lectures
- House of worship
- Broadcast
Shure GLXD14+/85 Includes:
- GLXD4+ Tabletop Receiver
- GLXD1+ Bodypack Transmitter
- WL185 Lavalier Microphone
Shure GLXD14+/85 Features:
- Tabletop GLXD+ Dual Band receiver + bodypack transmitter + lavalier mic.
- WL185 cardioid condenser microphone.
- Dual Frequency operation (2.4GHz and 5.8GHz).
- Very similar look and features available in prior GLX D version.
Shure GLXD14+/85 Specifications:
- System
- Compatibility
- With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions
- Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
- System Operating Range:
- Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
- Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
- Transmit Mode: Shure Proprietary Digital - Dual Band (2.4 GHz and 5.8 GHz)
- Audio Frequency Response: 20 Hz – 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 0.07%, typical
- RF Output Power: 10 mW E.I.R.P. max
- Operating Temperature Range: -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces
- positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
- Battery Life: Up to 12 hours
- NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.
- GLXD4+ Receiver
- Dimensions: 7.2 x 4.8 x 1.6 in. (182.8 x 121.97 x 40.3 mm), H x W xD, antennas folded
- Weight: 10.9 oz (310 g)
- Housing: Molded Plastic
- Power Requirements: 14.5 V - 17 V, 600mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -20 to 40 dB in 1 dB steps
- Phantom Power Protection: Yes
- Configuration
- XLR Output, Impedance balanced
- 6.35 mm (1/4“) output, Impedance balanced
- Impedance
- XLR Output: 100 Ω
- 6.35 mm (1/4“) output: 100 Ω (50 Ω, Unbalanced)
- Maximum Audio Output Level
- XLR connector (into 600 Ω load): 1 dBV
- 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV
- Pin Assignments
- XLR Output: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
- RECEIVER ANTENNA INPUT
- Impedance: 50 Ω
- Antenna Type: Dual Band 1/2 Wave Sleeve Dipole, non-removable
- Maximum Input Level: −20 dBm
- GLXD2+ Bodypack Transmitter
- Dimensions: 4.5 x 2.6 x 1.1 in. (115 x 66.94 x 28.51 mm), (H x W x D), without antenna
- Weight: 5.4 oz (153.1 g), without battery
- Power Requirements: 3.7 V Rechargeable Li-Ion
- Housing: Cast Metal, Black Powdercoat
- Input Impedance: 900 kΩ
- RF Output Power: 10 mW E.I.R.P. max
- TRANSMITTER INPUT
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)
- Antenna Type: Dual Band Internal Monopole
- Pin Assignments TA4M
- 1: Ground (cable shield)
- 2: + 5 V Bias
- 3: Audio
- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
- WL185 Microphone
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 Ω
- Dynamic Range: 102.5 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter