Angry Audio Bidirectional Balancing Gadget 2x IHF Inputs and Outputs and 2x PRO Audio Inputs and Outputs

While having audio available anywhere, anytime, and on every device is great for consumers, it's not always great for quality. That's why you need the Bidirectional Balancing Gadget. Unbalanced consumer playback devices (phones, tablets, soundcards) output audio at a level far below the input requirements of balanced professional gear (mixing and broadcast consoles, processors). This results in increased noise and loss of signal integrity. Multiply that by how many inputs and outputs are between you and the listener, and you get the idea! The Bidirectional Balancing Gadget solves the problem by passing the unbalanced audio through Angry's analog circuitry, raising the level and delivering low-noise, low-distortion balanced audio to the XLR outputs to the satisfaction of your gear and your ears. And for those times when you need to feed balanced audio to unbalanced gear (think a computer to a mixer and back to the computer), the gadget has you covered with XLR inputs that cleanly convert a +4dBu input down to a -10dBu output. The Bidirectional Balancing Gadget is easy to use, presenting you with a few controls and a pair of RCA and XLR inputs that pass the signal to stereo RCA and XLR outs, and that's it. Simple, powerful, necessary.

Angry Audio BI-BALANCING-GADGET Applications:

• Broadcast
• Podcast
• DJs
• Recording studios

Angry Audio BI-BALANCING-GADGET Features:

• Feeds professional gear with the output from consumer devices
• Feeds consumer devices with the output from professional gear
• Increases or decreases signal level
• Low-noise, low-distortion signal conversion
• Eliminates RFI (Radio Frequency Interference)
• Eliminates ground loop noise
• Compatible with long cable runs
• Fixed and variable input gain
• One unbalanced (-10dBu) stereo RCA input
• One unbalanced (-10dBu) stereo RCA output
• One Balanced (+4dBu) stereo XLR input
• One Balanced (+4dBu) stereo XLR output

Angry Audio BI-BALANCING-GADGET Specifications:

• Unbalanced to Balanced Conversion
  • Fixed Gain: +11.8dB (-10dBv in = +4dBu out)
  • Adjustable Gain Range: +10dB to +28db
• Frequency Response: ± 0.2dB, 20Hz – 20kHz
• THD+N: ≤ 0.004%, 20Hz – 20kHz
• Noise: ≤ 90dBu (20Hz to 20kHz, fixed gain position)
• Headroom: ≥ 20dB
• Maximum Output Level: +26dBu (+24dBm @ 600Ω load)
• Input Impedance: 100kΩ
• Output Impedance: 100Ω balanced
• Crosstalk: ≤ -75dB (10kHz)
• CMRR: ≥ 70dB (20Hz to 20kHz)
• Balanced to Unbalanced Conversion
  • Fixed Gain: -11.8dB (+4dBu in = -10dBv out)
  • Adjustable Gain Range: -17dB to +1dB
• Frequency Response: ± 0.2dB (20Hz to 20kHz)
• THD+N: ≤ 0.004% (20Hz to 20kHz)
• Noise: ≤ 90dBu (20Hz to 20kHz, fixed gain position)
• Headroom: ≥ 20dB
• Maximum Output Level: +15dBv
• Input Impedance: 20kΩ
• Output Impedance: 100Ω (pseudo-balanced)
• Crosstalk: ≤ -75dB (10kHz)
• CMRR: ≥ 70dB (20Hz to 20kHz)
• Power and Environmental
  • North American Version: 115VAC 60Hz, NEMA 5-15P power plug
  • Export Versions: 230VAC 50/60Hz, various plugs
  • Power Consumption: 5VA
  • Operating Temperature: 0º to 40º C (32º to 104º F)
  • Storage Temperature: -20º to 45º C (-4º to 113º F)
  • Relative Humidity: 0% to 90% non-condensing
  • Cooling: Vented chassis (fanless)
• Product Weight & Dimensions
• Width x depth x height 8.5 x 6.25 x 1.70 in., 21.6 x 16 x 4.32 cm.
• Weight 3.5 pounds, 1.6 kilograms
• Shipping Weight & Dimensions
• Length x width x height 12 x 9 x 6 in., 31 x 23 x 16 cm.
• Weight 5 pounds, 2.3 kilograms