Product Overview
Facilitates direct point-to-point connectivity for extending USB signals over CAT6a/CAT7 cables, reaching up to 330 ft (100 m). Simultaneously supports USB 3.2, 2.0, and 1.1 signals, while also offering enhanced support for USB cameras and video capture devices utilizing isochronous (ISO) transport.
Crestron USB-EXT-3-KIT Features:
- Point-to-point connectivity for USB signal extension over CAT6a/CAT7 up to 330 ft (100 m)
- USB 3.2 Gen 1 data rate up to 5 Gbps
- Support of USB 3.2, 2.0, and 1.1 signals simultaneously
- Support of all USB transfer types: control, interrupt, isochronous (ISO), and bulk
- Enhanced support for USB cameras and video capture devices using ISO transport
- USB-EXT-3-LOCAL extender for connection to USB host
- USB-EXT-3-REMOTE extender for connection to up to four USB devices at one location
- Gigabit Ethernet pass-through port
- Plug-and-play functionality without the need for additional drivers
- Compatibility with the Windows®, macOS®, Linux®, and Chrome OS™ operating systems
- Freestanding or surface mountable (optional mounting kit included)
- 24 VDC power pack included for each extender
Crestron USB-EXT-3-KIT Specifications:
- Communications:
- Link: Proprietary link for point-to-point connection between the USB-EXT-3-LOCAL and USB-EXT-3 REMOTE
- USB: Speeds:
- USB 3.2 Gen 1 up to 5 Gbps;
- USB 2.0 up to 480 Mbps;
- USB 1.1 up to 12 Mbps Maximum Number of Devices: 30 devices using 1 USB port on USB-EXT-3-REMOTE and maximum of 3 hubs
- Ethernet: 100BASE-TX/1000BASE-T for LAN passthrough
- Connectors – USB-EXT-3-LOCAL:
- 24V 1A: DC power connector; 24 VDC power input
- USB: (1) USB Type-B connector, female; USB 3.2 Gen 1 host port for connection to computer, media server, game console, or other USB host; Backward compatibility with USB 2.0 and USB 1.1
- Link: (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-REMOTE; Up to 330 ft (100 m) over CAT6a/7 cable
- LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable
- Config: Reserved for factory use only
- Connectors – USB-EXT-3-REMOTE:
- 24V 2.71A: DC power connector; 24 VDC power input
- USB: (4) USB Type-A connector, female; USB 3.2 Gen 1 device ports for connection to USB cameras, video capture devices, flash drives, keyboards, mice, hubs, or other USB devices; Maximum number of USB hubs supported: 3
- Backward compatibility with USB 2.0 and USB 1.1; Available Power: 1.2A (6W) per USB port
- Link: (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-LOCAL
- Up to 330 ft (100 m) over CAT6a/7 cable
- LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable
- Config: Reserved for factory use only
- Controls and Indicators:
- Power: (1) LED. Green indicates that power is being supplied from the included power pack.
- Mode: Reserved for factory use only
- Status: (1) LED. Solid green indicates that the system is functioning normally. Flashing green indicates that the system is booting or may also indicate a temperature warning in unison with the Link, USB 2, and USB 3 LEDs.
- Link: (1) LED. Green indicates that a link has been established between the local and remote extenders.
- USB 2: (1) LED. Solid green indicates that a USB 2 connection is detected when a host device is connected to the USB port on the USB-EXT- 3-LOCAL. Flashing green indicates that the USB 2 connection has been suspended or is in sleep mode.
- USB 3: (1) LED. Solid green indicates that a USB 3 connection is detected when a host device is connected to the USB port on the USB-EXT-3-LOCAL. Flashing green indicates that the USB 3 connection has been suspended or is in sleep mode.
- LAN: (2) LEDs on RJ-45 connector. Solid green indicates that a link has been established between the extender and the network or network device. Flashing green indicates Ethernet activity.
- Power – USB-EXT-3-LOCAL:
- Power Pack (Included):
- Input: 100-240 VAC, 50/60 Hz
- Output: 1A @ 24 VDC3
- Power Consumption: 24W
- Power – USB-EXT-3-REMOTE:
- Power Pack (Included):
- Input: 100-240 VAC, 50/60 Hz
- Output: 2.71A @ 24 VDC3
- Power Consumption: 41W (24W allocated to 4 USB devices)
- Environmental:
- Temperature:
- Operating: 32° to 122°F (0° to 50°C)
- Storage: -4° to 158°F (-20° to 70°C)
- Humidity:
- Operating: 20% to 80% RH (non-condensing)
- Storage: 10% to 90% RH (non-condensing)
- Heat Dissipation:
- USB-EXT-3-LOCAL: 81.8 BTU/hr
- USB-EXT-3-REMOTE: 139.8 BTU/hr
- Acoustic Noise: None (fanless)
- Enclosure:
- Chassis: Black anodized aluminum
- Mounting: Freestanding or surface mountable (optional mounting kit included)
- Dimensions:
- Height: 1.34 in. (34 mm)
- Width: 9.15 in. (233 mm)
- Depth: 5.68 in. (144 mm)
- Weight:
- USB-EXT-3-LOCAL: 2.23 lb (1.01 kg)
- USB-EXT-3-REMOTE: 2.26 lb (1.03 kg)
- Compliance:
- Regulatory Model: USB-EXT-3
- IC, CE, FCC Part 15 Class B digital device
