Product Overview
Compatibility with a DM Lite® receiver or DMPS Lite™ switcher, enabling seamless point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Equipped with one HDMI input and one USB-C DisplayPort input with automatic switching capability. Designed for mounting into a 2-gang electrical box.
Note: Faceplate sold separately.
Crestron HD-TX-4KZ-211-2G Features:
- Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
- Point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal over a CAT5e or higher cable
- USB-C input with DisplayPort Alt Mode capability
- DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- 4K60 4:4:4 capability
- HDR10, HDR10+, and Dolby Vision® video formats
- Compliance with HDCP 2.3
- Automatic switching of HDMI and USB-C DisplayPort inputs
- CEC (Consumer Electronics Control) pass-through capability
- EDID pass-through capability
- Two-gang wall plate design with black finish
- Decorator style faceplate required (FP-G2-DM Series sold separately)
- Power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher
Crestron HD-TX-4KZ-211-2G Specifications:
- Video:
- Input Signal Types: HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible4) and DisplayPort over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
- Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support
- Copy Protection: HDCP 2.3
- Audio:
- Input Signal Types: HDMI, DisplayPort over USB-C (DisplayPort Alt Mode)
- Output Signal Type: DM Lite
- Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
- Communications:
- HDMI: HDCP 2.3, EDID, CEC pass-through
- USB‑C: HDCP 2.3, EDID, CEC pass-through
- DM Lite: HDCP 2.3, EDID pass-through
- Connectors:
- HDMI IN: (1) HDMI Type A connector, female; HDMI digital video/audio input; DVI and Dual-Mode DisplayPort interface compatible
- USB IN: (1) USB Type‑C® connector, female; Digital video/audio input using DisplayPort Alt Mode
- DM LITE OUT: (1) 8‑pin RJ‑45 yellow connector, female, shielded;
- DM Lite output port for connection to a DM Lite receiver or DMPS Lite™ switcher
- 24V 0.7A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-TX-4KZ-211-2G is used with a wall plate receiver
- Ground: (1) Chassis ground lug
- Controls and Indicators:
- PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
- AUTO: (1) Push button for enabling or disabling automatic switching of inputs; (1) LED, green indicates that automatic switching of inputs is enabled
- SETUP: (1) Push button for Ethernet setup (applicable only when used with a DMPS Lite switcher); (1) LED, red indicates that the SETUP push button is pressed
- LINK: (1) LED, green indicates that a DM Lite link is established
- INPUT: (1) Push button for manual input selection
- HDMI IN: (1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output
- USB IN: (1) LED, green indicates that the USB-C DisplayPort input is routed to an output, and amber indicates that a source is detected but is not routed to an output
- RESET: (1) Push button for restoring the device to factory default settings
- DM LITE OUT: (2) LEDs on RJ‑45 connector. Green indicates that a DM Lite link is established; Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.
- Power:
- Power Pack:
- Input: 100-240VAC
- Output: 24VDC 0.75A
- Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-211-2G is used with a wall plate receiver)
- Environmental:
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 20% to 90% RH (non-condensing)
- Construction:
- Composition: Metal housing and bracket with black polycarbonate front label overlay
- Mounting: Mounts in a 2-gang (or larger) 2-inch (51 mm) deep U.S. electrical box or plaster ring (not included)
- Faceplate: Requires a decorator style faceplate (FP-G2-DM Series, sold separately)
- Dimensions:
- Height: 4.12 in. (105 mm)
- Width: 3.57 in. (91 mm)
- Depth: 1.66 in. (42 mm)
- Weight: 7.33 oz (208 g)
- Compliance:
- Regulatory Model: M202046004
- Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class A digital device