Product Overview
The Millennia HV-316 is an 8-channel mic preamp with remote control capabilities and Dante connectivity, crafted to deliver exceptionally lifelike sound reproduction. Featuring 8 channels of Millennia HV-3 microphone preamps, it offers simultaneous analog and Dante 32-bit/192 kHz Ethernet outputs.
Millennia Media Features:
- 8 or 16 channels of pristine Millennia HV-3 microphone preamplifiers in a road-hardened 1U chassis
- Effortless, vividly realistic, dynamically uniform HV-3 musical performance
- Dante network output standard -- MADI and analog output options.
- Both 12VDC (battery) and 80-264VAC worldwide powering
- Redundant power supply for fail-safe, glitch-free operation
- Paralleled next-generation AKM A-to-D conversion
- Designed for ultra-high-temperature continuous operation (65C / 150F)
- RF “pi filter” shielding provided on analog and digital feeds, destroys mobile interference
- Control up to 256 channels at once via conventional Ethernet
- +34dBu input headroom for use in the most extreme audio environments
- Matched discrete-octet transistor gain topology, the classic Millennia HV-3 double-balanced circuit
- Ælogic Mac & Windows third-generation software offers total control for both HV-316 and HV-3R on the same network
- High-definition meters, grouping, linking, scene management, temperature monitoring
- Entirely balanced audio path with precision components maintains signal integrity: THD under 10 PPM (< .001%)
- Laser-trimmed FET-based output stage (analog output option) drives 1000-foot (300m) cable runs with ease
- All channels matched to 0.08 dB
- Advanced power supply rated for 650,000 hours MTBF operation
- Aluminum 16-gauge rack chassis, ultra-lightweight, just 10 pounds
- Billet aluminum laser etched front-panel
- Hand-built and quality-assured in Northern California USA
Millennia Media Specifications:
- Minimum Gain: 1 dB
- Maximum Gain (1 dB per step): 64 dB
- Attenuator Pad: -20 dB
- Frequency Response (analog output option) (+0 / -3 dB): sub 8 Hz to beyond 200 kHz (analog)
- Noise (60 dBu Gain, 10 Hz - 30 kHz, Inputs common): -130 dB EIN
- Total Harmonic Distortion + Noise (35 dB Gain): < .005%, (
- Intermodulation Distortion (50 Hz & 7 kHz), 35 dB Gain, 0 dBFS: < .0009%
- Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, 0 dBFS: < 2 degrees deviation
- Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.): > 65 dB, Typ > 85 dB
- Slew Rate (35 dB Gain): > 25 Volts per microsecond
- Maximum Input Level (20 Hz - 40 kHz): +34 dBu (pad in)
- Maximum Output Level (20 Hz - 40 kHz): +22 dBu (analog output option)
- Phantom Input Impedance (1 kHz): 6,750 ohms
- Output Impedance: 24.3 Ohms (analog output option)
- Phantom Powering: +48 V dc, +/- 2 V dc, 15 ma per channel in reserve
- Power Consumption:
- 100 watts maximum
- AC: Universal 80-264V, 47-63 Hz
- DC: 12V
- Dimensions/Shipping Weight: 19" W x 1.75" H x 16" D, 10 lbs. (16ch), 9 lbs (8ch)
- DANTE:
- Physical Layer: Ethernet
- Connectors: Dual RJ-45 (Primary / Secondary)
- Cable Quality: CAT-5e or better
- Transmission Speed: 1Gbps
- Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Minimum Dante Latency: 250 µS
- Supported Modes: Redundant / Switched
- AES67 Support: Planned (Dante embedded)
- Certifications:
- FCC CFR 47 Part 15 Subpart B, Class A
- ICES-03 Issue 6 (Canada)
- ANSI C63.4-2014
- EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013
- Compliance:
- RoHS 2011/65/EU (and delegated directive (EU) 2015/863)
- WEEE 2012/19/EU + REACH
- Environmental:
- -10o to +65oC / +15o to +150oF (fans enabled)
- -10o to +45oC / +15o to +115oF (fans disabled)
- 10% to 80% RH
- Maximum Altitude: 5,000 meters
