EAW UXA4403 4-Channel Amplifier with DSP

The UXA Installation Series amplifiers are tailored to complement various EAW installation products with suitable power levels. Every amplifier comes pre-loaded with Greyboxes for all relevant EAW loudspeakers.

EAW UXA4403 Features:

• Shipped with rack “ears” for standard equipment rack
• 4 inputs & 4 outputs.
• Pairs seamlessly with EAW installation loudspeakers.
• Optional Sync Functionality by S/PDIF linking to multiple amps.
• Connect wirelessly or direct to the amplifier via a web page interface.
• Configurable GPIO for additional control.
• Safety and EMC Certified. Compliant to ErP & EnergySTAR.

EAW UXA4403 Specifications:

• Channels: 4
• Output power @ 2.7ohms: 4 x 1200W
• Output power @ 4ohms: 4 x 800W, 2 X 2500W (BTL)
• Output Power: @ 8ohms 4 x 400W
• Output Power: 70V 2 x 1200W (BTL)
• Output Power: 100V 2 x 1500W (BTL)
• Total System Power: 3200W/5000W
• Power Consumption: 700W
• Dimensions: 3.5 x 17.35 x 12.60 in (88 x 440 x 320 mm)
• Weight: 16.1 lbs (7.3 kg)
• Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
• Output Voltage: 85 Vp / 170 Vpp (unloaded) // Bridged 170 Vp / 340 Vpp (unloaded)
• Signal To Noise-Ratio: > 108 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
• THD+N (typical): < 0.05% (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
• Frequency Response: 20 Hz – 20 kHz (+/- 0.5 dB, 8 Ω load, 3 dB below rated power)
• Protection Circuits: Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
• Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
• Operating temperature: 0-40C
• Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
• Standby Consumption:
• Accessories: Rack mounts
• Power Ratings: 1% THD @ 120Vac and 230Vac