Product Overview
Compatibility with a DM Lite® receiver or DMPS Lite™ switcher for seamless point-to-point extension of an HDMI® signal over a CATx cable. Capable of supporting 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Designed for mounting into a 1-gang electrical box.
Note: Faceplate sold separately.
Crestron HD-TX-4KZ-101-1G Features:
- Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
- Point-to-point extension of an HDMI® signal over a CAT5e or higher cable
- DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- 4K60 4:4:4 capability
- HDR10, HDR10+, and Dolby Vision® video formats
- Compliance with HDCP 2.3
- CEC (Consumer Electronics Control) pass-through capability
- EDID pass-through capability
- One-gang wall plate design with black finish
- Decorator style faceplate required (FP-G Series sold separately)
- Power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher
Crestron HD-TX-4KZ-101-1G Specifications:
- Video:
- Input Signal Type: HDMI® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support (DVI and Dual-Mode DisplayPort™ interface compatible)
- Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support
- Copy Protection: HDCP 2.3
- Audio:
- Input Signal Type: HDMI
- Output Signal Type: DM Lite
- Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
- Communications:
- HDMI: HDCP 2.3, EDID, CEC pass-through
- DM Lite: HDCP 2.3, EDID pass-through
- Connectors:
- HDMI IN: (1) HDMI Type A connector, female; HDMI digital video/audio input; DVI and Dual-Mode DisplayPort™ interface compatible
- DM LITE OUT: (1) 8‑pin RJ‑45 yellow connector, female, shielded; DM Lite output port for connection to a DM Lite receiver or DMPS Lite™ switcher
- 24V 0.75A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-TX-4KZ-101-1G is used with a wall plate receiver
- Ground: (1) Chassis ground lug
- Controls and Indicators:
- LINK: (1) Green LED, indicates that a DM Lite link is established.
- PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
- HDMI IN: (1) Green LED, indicates that the device is receiving an HDMI signal
- DM LITE OUT: (2) LEDs on RJ‑45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.
- Power:
- Power Pack:
- Input: 100-240VAC
- Output: 24VDC 0.75A
- Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-101-1G is used with a wall plate receiver)
- Environmental:
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 20% to 90% RH (non-condensing)
- Construction:
- Composition: Metal housing and bracket with black polycarbonate front label overlay
- Mounting: Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
- Faceplate: Requires a decorator style faceplate (FP-G series, sold separately)
- Dimensions:
- Height: 4.12 in. (105 mm)
- Width: 1.72 in. (44 mm)
- Depth: 2.19 in. (56 mm)
- Weight: 5.33 oz (152 g)
- Compliance:
- Regulatory Model: M202045001
- Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
