Product Overview
The Matrox ConvertIP DSH represents a compact, autonomous ST 2110 and IPMX transmitter/receiver apparatus. It is equipped with HDMI I/O, one RJ45, and two SFP28 ports, all integrated into a single device. Engineered to accommodate compressed or uncompressed workflows up to 25G, it excels in delivering an ultra-low latency experience. Additionally, the device offers Power over Ethernet capability via its RJ45 connection, or it can alternatively draw power from an optional power supply unit. Both power delivery methods can be employed simultaneously to ensure power redundancy.
Matrox CIP-DSH Features:
- HDMI I/O
- Multi-network support
- 2x SFP28 (10G & 25G network support for Media and Control)
- 1x RJ45 (1G network support for independent control network)
- Transmit or receive IP signals from a single device
- Boost monitoring capacity and resiliency using Daisy Chain Mode
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Zero latency HDMI loop-out
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- ConvertIP Command Center web interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
- HDCP 1.4 and 2.2 support
Matrox CIP-DSH Specifications:
- Converter Type: Up/Down Converter
- Rackmountable: Yes
- ROHS Compliant: Yes
- Warranty: Yes
- Spec Sheet available: Yes
- Warranty Length/Type: 3 Years
- Certifications: EU, REACH, CE (EU), FCC (USA), ICES-003 (Canada), KC (Korea), RCM (Aus/NZ)
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.50 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Active Power: 18 Watt
- Depth: 7.13 in
- Height: 1.42 in
- Width: 7.53 in
- Product Weight: 1.66 lbs
- Color: Black
- Form Factor: Standalone appliance, Rack-mountable: 1U, 1/2 rack (horizontal)
- Video Input: 1x HDMI
- Video Outputs: 1x HDMI (zero latency pass-through in Tx mode)
- Audio Input/Output: Up to 8 channels of audio embedded in HDMI signal, Unbalanced analog stereo input via 1/8“ (3.5mm) jack, Line Level
- Network Connector: 2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2
- RS-232: Yes
- Control and management: Web browser-based UI, standalone utility
- Maximum Video Resolutions: 4096 x 2160 60p, All standard desktop GPU resolutions supported
- Color Space: YUV 4:2:0 10-bit and 8-bit, YUV 4:2:2 10-bit, RBG 4:4:4 8-bit, SDR/HDR
- Video Scaling: High-Quality multi-tap 10-bit Up/Down Scaler
- Video Deinterlacing: Yes
- Color Space Conversion: Yes
- HDCP Support: Yes
- Video: Uncompressed HD 3 Gbps, 4K 12 Gbps, ProAV 4:4:4 8-bit codec
- Audio: Uncompressed PCM (~1 Mbps/ch)
- Latency: Less than a 1/4 frame (
- Network and IP Addressing: Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet, IP addressing: IPv4, IPv6, DHCP (default) and static IP
- Supported Protocols: SMPTE ST 2110 (-10, -20, -21, -30, -31, and -40), SMPTE ST 2059-2, SMPTE ST 2022-7
- Redundancy: Yes (ST 2022-7)
- Command and Control: HTTPS over TCP
- Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
- PoE+: Yes (IEEE 802.3at Type 2)
- Cooling: Fanless
- Hardware included: ConvertIP DSH appliance
- Optional Hardware: ConductIP NMOS-based routing solution
- Optional Software: JPEG-XS codec license
- Software: Matrox ConvertIP Command Center (Web UI), Matrox ConvertIP Manager (Microsoft® Windows® 10)
- Operating Conditions: Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m), Humidity: 20% to 80% non-condensing
- Storage Conditions: Temperature: -40 to 70 degrees Celsius, Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m), Humidity: 5% to 95% non-condensing
- Rack Units (Height): 1
