Product Overview
The Voice Over Starter Bundle is a complete package designed to kickstart any voice artist or podcaster's journey with excellence. At its core, the SE Electronics X1-A is a high-quality condenser microphone intended for a wide range of studio applications, from vocals to drums to acoustic instruments and beyond. Thanks to its custom design and carefully selected capsule, it delivers pristine sound quality and an even, well-balanced frequency response. This bundle doesn't stop there—it also includes a sturdy Stand for optimal positioning, a 2x2, studio-grade, Focusrite Scarlett Interface, and a pair of Headphones for accurate monitoring during recording or playback. A supplemental accessories pack offers even greater convenience and versatility. With the Voice Over Starter Bundle, you have everything you need to embark on your voiceover or podcasting journey with confidence.
SE Electronics Voice Over Starter Bundle Includes:
- 1 x SE Electronics X1-A Condenser Microphone
- 1 x SCARLETT-SOLO-4G USB Audio Interface
- 1 x HD280-Pro Headphones
- 1 x JS-MCTB200 Tripod Microphone Stand
- 1 x MSA7011 U-Mount Clamp-On Bookplate
- 1 x GM-POPFILTER Split Level Pop Filter
- 1 x MIC-XX-20 20' Mic Cable
Audio-Technica Voice Over Starter Bundle Features:
- SE Electronics X1-A
- Newly-developed condenser capsule with the same rugged metal chassis of the X1 series
- First-class sound & specifications at an even better "home studio" cost
- Extremely natural frequency response, massive SPL-handling capabilities (150dB!)
- Switchable attenuation and low-cut filters, with a perfectly balanced sensitivity level
- 100 Hz bass-cut filter and -20 dB attenuation pad
- SCARLETT-SOLO-4G
- Focusrite Scarlett Solo 4th Gen Features:
- Ultra-low-noise mic pre
- Hi-Z instrument input
- Huge 120 dB dynamic range
- Air Mode for studio console character
- Dynamic Gain Halos for easy level adjustments
- Custom-designed headphone amp
- Loopback for computer audio sampling
- Focusrite's Easy Start tool
- Software bundle with Ableton Live Lite, Avid Pro Tools Artist, and Hitmaker Expansion.
- Control session with Focusrite Control
- Three-year warranty and 24/7 support
- HD280-Pro
- 40mm drivers with rare earth magnets
- Copper-clad aluminum wire voice coils
- Tuned for enhanced LF performance
- Circumaural design contours the ears for improved isolation
- Convenient single-side cable exit
- JS-MCTB200
- The telescoping boom arm adjusts from 19.5" to 34.5"
- Strong, reliable tripod base
- Metal die-cast housing
- Standard 5/8" threading
- Non-slip rubber feet
- Strong, tip-resistant tripod base
- On-Stage MSA7011
- Enables a standard mic stand to perform double duty as a music stand
- The bookplate fits into tight spaces and holds standard-size sheet music
- umount clamp adjusts to fit a variety of mic stand shafts and booms
- Rotates and tilts for ease of viewing
- GM-POPFILTER
- 6" nylon screen pop filter
- 11.5" gooseneck and clamp included
- C-clamp fits most standard microphone stand shafts and booms
- Fully extends to 17" x 5" x 6.25"
Audio-Technica Voice Over Starter Bundle Specifications:
- SE Electronics X1-A
- Capsule Type: 2/3" Permanently-Biased Condenser
- Directional Pattern: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Impedance: < 50 Ohms
- Sensitivity: 20 mV/Pa (-34 dB)
- Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @1kHz)
- Signal to Noise Ratio: 78 dB(A)
- Equivalent Noise Level: 16 dB(A)
- Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
- Low Cut Filter: 100 Hz, 6 dB/oct, switchable
- Attenuation Pad: 20 dB, switchable
- Connectivity: 3-pin male XLR
- Power requirement: 48V phantom according to IEC 61938
- Recommended Load Impedance: >1K Ohms
- Current Consumption: 4.0 mA
- Diameter: 58 mm (2.28 in.) x Length: 169mm (6.65 in.)
- Weight: 390 g / 13.8 oz
- SCARLETT-SOLO-4G
- Number of Microphone Preamps: 1
- Phantom Power: Yes
- Instrument Inputs: 1
- Line Inputs: 1
- Air Mode: Yes
- Line Outputs: 2
- Headphone Outputs: 1
- Loopback: Yes
- Connectivity: USB Type-C
- Protocol: USB 2.0
- Form Factor: Desktop
- Simultaneous I/O: 4 x 2 (including Loopback inputs)
- A/D Resolution: 24-bit / 192 kHz
- Bus Powered: Yes (900 mA)
- Software Compatibility
- Scarlett Solo is class-compliant so will work with any modern Mac, Windows PC or USB-C iPad.
- USB-3.0 Bus power 5 V @ 900 mA 4.5 W
- External power supply (not included) - 5 V @ 1000 mA
- HD280-Pro
- Color: Black
- Wearing style: Headband
- Frequency response (headphones): 8 - 25000Hz
- Sound pressure level (SPL): 113dB
- THD, total harmonic distortion: 0.1%
- Contact pressure: 6N
- Ear coupling: circumaural
- Jack plug: 3.5/6.3mm stereo
- Connection cable: Coiled Cable (min.1.3m/max. 3m)
- Transducer principle: dynamic, closed
- Weight: w/o cable: 285g
- Nominal impedance: 64Ω
- Load rating: 500mW
- JS-MCTB200
- Stand Height: 40"-68"
- Boom Length: 19.5"-34.5"
- Base Diameter: 27"
- Threading: 5/8"
- Weight: 4.8 lbs.
- On-Stage MSA7011 Specifications:
- Application: Sheet music attachment for mic stand
- Bookplate Dimensions: 12 1/4" x 10 5/8" with 1" lip
- Clamp: Accepts tubing to 3/4"
- Mounting Bar Length: 9"; 8" mounted from stand
- Material: Steel
- Color: Black
- GM-POPFILTER
- Color: Black
- Nylon Screen: 6"
- Gooseneck Length: 11.5"
- Exterior Dimensions (LxWxH): 12" x 8" x 3"
- Product Weight: 2.5 lbs.
