Rosco Supersaturated Leather Lake - Quart Vinyl Acrylic Paint, Quart

OUR PART #: 05993-0032 MFR #: 150059930032

Copied to clipboard

Supersaturated is a distinctive vinyl acrylic paint available in concentrated form, offering remarkable versatility when diluted with water ... Read more

Rosco Supersaturated Leather Lake - Quart Vinyl Acrylic Paint, Quart Image 1
Rosco Supersaturated Leather Lake - Quart Vinyl Acrylic Paint, Quart
Our Price: $38.00
List Price: $42.00
You save 10%!
Synchrony Music & Sound Card
No Interest if paid in full within 6 Months
Learn How
Item usually available to ship in 5-9 Business Days. Please call for up-to-date information on product availability.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

Supersaturated is a distinctive vinyl acrylic paint available in concentrated form, offering remarkable versatility when diluted with water, typically at a ratio of 1:1 or higher. This exceptional extendibility allows for a wide array of effects while ensuring economical usage. Whether applied thinly for bright, translucent washes reminiscent of aniline dyes, or layered for vibrant, opaque color fields, Supersaturated delivers striking results across various surfaces. Formulated with a unique binder, it boasts superior adhesion, durability, and flexibility, even on challenging surfaces like Rosco Projection Screens and Rosco Dance Floors. Additionally, Supersaturated can serve as a tint in other water-based paints, binders, and coatings.

Note picture shows "Emerald Green" can for example, Leather Lake is actual product.

Rosco Supersaturated Leather Lake - Quart Specifications:

  • Finish: Flat/Matte
  • Solvent: Water
  • Binder Type: Vinyl Acrylic co-polymer
  • Dilution: Dilute at least 1:1with water, Rosco Clear Acrylic Glaze or a combination of the two as necessary. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 5 parts water may reduce binder strength. Add in Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
  • Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
  • Application: Stir contents well before each use. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
  • Film Thickness: 1:1 Dilution = 1.5 mil. Dry Film
  • Coverage: 3:1 Dilution = Approx. 300 sq. ft. per gallon (28 sq. m. per 3.79L), depending on substrate, application tool and film thickness.
  • Avg. Dry Time: At 75°F (24°C). Dries to the touch in 30-45 minutes. Can be recoated in 1-2 hours.
  • Clean-up: Soap and water.
  • Shelf Life: Minimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location.
  • Packaging: 1 Quart Cans (0.946L). *Gallon and 5 gallons available (3.79L and 18.95L).
  • CAUTIONS: Do not apply when surface or air temperatures are below 50°F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
  • All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download