Tripp Lite B140-101X DVI over Cat5/6 Active Extender Kit

The B140-101X is a DVI over Cat5/6 Active Extender Kit. The B140-101X is a DVI over Cat5 Active Extender Kit, consisting of transmitter and receiver units, enabling the transmission of a DVI-D Single-Link signal up to 200 feet using a single Cat5e/6 Ethernet cable. It is compatible with all operating systems, requires no software or drivers, and includes built-in equalization control for video image adjustment. Simple installation involves connecting the transmitter to a DVI source, linking the receiver to a display, and connecting both units with a Cat5e/6 cable. The extender can reach up to 150 feet for a 1920 x 1080 at 60 Hz signal or 200 feet for a 1024 x 768 at 60 Hz signal.

For extended range and additional monitors, the B140-110 repeater unit can be used, allowing up to four displays in a single chain. Each repeater can extend a 1920 x 1080 at 60 Hz signal up to 125 feet or a 1024 x 768 at 60 Hz signal up to 175 feet to the next unit in the chain. The B140-101X is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Tripp Lite B140-101X Includes:

• B140-101X local transmitter unit
• B140-101X remote receiver unit
• Screwdriver (used for Equalization control)
• Mounting hardware for receiver unit
• External Power Supply with NEMA 1-15P Plug (Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5-ft. (1.52 m)
• Owner's manual

Tripp Lite B140-101X Features:

• Extender kit comes with transmitter and receiver units
• Transmit a DVI-D Single-Link signal up to 200-ft. (61 m) away using a single Cat5e/6 patch cable
• Supports DVI-D Single-Link video resolutions up to 1920 x 1080 at 60 Hz
• Extends a 1920 x 1080 at 60 Hz signal up to 150-ft. (45.7 m), or a 1024 x 768 at 60 Hz signal up to 200-ft. (61 m)
• Use 24 AWG Solid Wire Cat5e/6 cable, such as N202-Series, to achieve maximum distance and resolution
• Features a built-in Equalization control for adjustment of the video image
• Further expand the range and number of monitors by using a B140-110 repeater unit
• Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a channel)
• A 1920 x 1080 at 60 Hz signal can be extended up to 125-ft. (38.1 m) from each repeater to the next unit in the chain, or a 1024 x 768 at 60 Hz signal can be extended up to 175-ft. (53.3 m)
• HDCP compatible
• Compatible with all operating systems
• Plug and play; no software or drivers required
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases