Product Overview
The Martin ELP PAR static LED fixture redefines the static wash category, boasting unrivaled lumen output, a high-intensity narrow zoom, precise full-gamut color calibration, and intelligent rigging and control features.
Its quick-focus system and clear angle of projection indicators streamline installation, while its wide zoom range facilitates both stage illumination and tight mid-air beam effects. With an advanced color-calibration system, extended color mode, and RGB color mixing around the desired white point, it offers accurate color reproduction and precise color temperature control.
Whether for theatre productions, festivals, exhibitions, or corporate events, this versatile LED fixture sets a new performance standard, filling the stage with vibrant color and delivering stunning beam effects.
Martin Pro MAR-90800005 Includes:
- Adjustable mounting bracket
- Safety and Installation Manual
Martin Pro MAR-90800005 Features:
- Light engine: 7 x 40W RGBW
- Full-gamut color-calibration system
- CTC control: 1,800–12,850 K
- Lumen output: 3,500 lm
- Intensity: 390,000 cd
- Zoom: 4.2 - 58°
- Quick Focus mode allows installation and focusing without the need for a console operator
- Clear of projection indicators allow quick installation
- Angled power and data connections support a clean cable run that does not impede the fixture or installation
- Included truss and floor-mounting yoke with omega bracket connectivity
- Low-noise 33 dB Theatre mode operation
- IP20 rating
Martin Pro MAR-90800005 Specifications:
- Physical:
- Length: 312 mm (12.3 in.)
- Width: 287 mm (11.3 in.)
- Height: 401 mm (15.8 in.) with bracket
- Weight: 7.8 kg (17.2 lbs.)
- Dynamic Effects:
- Color mixing: RGBW
- Color presets: 48 color presets, virtual color wheel effects
- Zoom: Motorized
- Color temperature control: Variable 1,800 – 12,850K
- Electronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic shutter effect: Instant open and blackout
- Control and Programming:
- Control options: DMX, RDM
- 16-bit fine control: Dimming, RGB, zoom
- LED color management modes: Raw, extended and calibrated
- DMX address setting: Control panel with OLED display
- DMX channels: 14
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: via DMX using Martin Companion
- Optics:
- Light source: 7 x 40 W RGBW Osram LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- Beam angle (half-peak): 4.2° - 38.7°
- Field angle (one-tenth peak): 5.1° - 58.6°
- Cutoff angle (3%): 5.7° - 69.6°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data:
- Wide beam: 3525 lumens
- Narrow beam: 1445 lumens
- Fixture Center Intensity Narrow Beam: 390083 cd
- Fixture Center Intensity Wide beam: 9957 cd
- CRI (Color Rendering Index) : >70
- CQS (Color Quality Scale): 83
- TM-30 Rf (IES TM-30-15 Fidelity Index): 77
- TM-30 Rg (IES TM-30-15 Gamut Index): 117
- TLCI (Television Lighting Consistency Index): 61 CCT: 6500 Kelvin
- LED refresh rate - Standard Mode: 3600 Hz
- LED refresh rate - Theatre Mode: 19200 Hz
- Construction:
- Housing: Aluminum and composite
- Filter mount: 191 x 191 mm (7.5 x 7.5 in.)
- Color: White
- Protection rating: IP 20
- Installation:
- Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
- Location: Not for household use, indoor use in dry location only
- Orientation: Any
- Minimum distance to combustible materials: 0.5 m (1.7 ft.)
- Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
- Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)
- Connections:
- AC power input/output: Neutrik PowerCON TRUE1 TOP
- DMX and RDM data in/out: Neutrik 5-pin locking XLR
- Electrical:
- AC power: 100-240 V AC nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Typical half-cycle RMS inrush current at 240 V, 50 Hz: 8.7 A
- Power Factor: 0.99 @ 100 V / 120 V , 0.94 @ 220 V / 230 V / 240 V
- Typical current draw: 3.0 A @ 100 V / 120 V , 1.7 A @ 220 V / 230 V / 240 V
- Power Consumption Typical: 300 W
- Thermal:
- Cooling: Forced air (temperature regulated, low noise)
- Total heat dissipation (calculated): 1170 BTU/hr.
- Maximum surface temperature: 65° C (149° F)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): -10° C (14° F)
- Acoustic Data:
- Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.1 dB(A)
- Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 33.0 dB(A)
