DPA 4018VL-B-B01-DEMO Linear Supercardioid Microphone

Crafted to capture vocal performances, not color them, the d:facto™ Vocal Microphone has a supercardioid capsule that faithfully captures every nuance with clarity, consistency, and emotion. Whether in a cozy club or a grand concert hall, these mics deliver unrivaled performance. Unlike conventional supercardioid mics, the d:facto™ Series minimizes undesirable rear lobes, reducing feedback from stage monitors. Its wider pickup angle ensures uniform side and rear damping while maintaining a consistent work field reminiscent of a cardioid pattern. The d:facto™ 4018VL offers exceptional linearity, catering to audio engineers seeking to shape their sound uniquely. With a directional characteristic that combines the best of cardioid and supercardioid patterns, this mic features three-step pop protection and minimal handling noise. Trusted for their balanced linear phase and frequency response, they faithfully reproduce vocals with natural detail, making them a favorite of engineers and performers alike.

DPA 4018VL-B-B01-DEMO Features:

• Durable modular construction
• High gain-to-feedback
• Uniform supercardioid directionality
• Excellent off-axis rejection
• Extreme SPL (Sound Pressure Level) handling
• Low handling noise

DPA 4018VL-B-B01-DEMO Specifications:

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB, at 12 cm (4.7 in): 40 Hz - 16 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz
  • 5 mV/Pa; -46 dB re. 1 V/Pa
  • 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
• Equivalent noise level, A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
• Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range: Typ. 120 dB
• Max. SPL, THD 10%: 160 dB SPL peak
• Rated output impedance: 100 Ω
• Minimum load impedance: 1 kΩ
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
• Power supply (for full performance): P48 (Phantom Power)
• Current consumption: Max 2.0 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color: Matte black
• Weight: 309 g (10.9 oz)
• Microphone diameter: 52 mm (2.05 in)
• Capsule diameter: 19 mm (0.75 in)
• Microphone length: 205 mm (8.1 in)
• Maximum output voltage, RMS: 8 V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%