RDL STVCA3 [Restock Item] Voltage Controlled Amplifier

Radio Design Labs' ST-VCA3 is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier’s level. For installations where it is preferred to keep the audio localized in the rack, audio controls are extended outside the rack from the ST-VCA3. Many installations benefit from avoiding long-term potentiometer wear from audio running through the potentiometer. An ST-VCA3 with external dc control provides virtual immunity from scratchy audio. Audio/video system control units often provide 0 to 10 Vdc control outputs that can directly control audio levels using an ST-VCA3. The ST-VCA3 is primarily intended for line-level attenuation; a high-quality utility microphone preamplifier is included in the module. If remote control of a microphone preamplifier is desired, such as a wall mounted level control for a microphone jack, the ST-VCA3 may serve as a remote controlled microphone preamplifier. The durable bottom adhesive permits quick, permanent mounting nearly anywhere–or use it with RDL's racking accessories.

This is a Restock item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

RDL STVCA3 [Restock Item] Applications:

RDL STVCA3 [Restock Item] Includes:

RDL STVCA3 [Restock Item] Features:

• • Audio level control from a DC voltage source
  • Audio level remote control
  • Two-wire with shield or three-wire control
  • VCA with mic or line level input and line-level output
  • VCA with LED metering of operating level

RDL STVCA3 [Restock Item] Specifications:

• • Inputs (2):
    • Mic: 200 Ohms balanced; 5 k Ohms unbalanced
    • Line: 30 k Ohms bal. bridging or unbalanced
  • Input Levels (for +4 dBu output):
    • Mic: –44 dBu to –60 dBu (150 Ohms source)
    • Line: -18 dBu (-20 dBV) to +4 dBu
  • Output Signal (normal rated): +4 dBu, 150 Ohms balanced
  • Headroom: 18 dB
  • THD+N:
    • Mic: < 0.05%
    • Line:
    • 025% typical at 15 dB attenuation
  • Frequency Response:
    • Mic: 30 Hz to 20 kHz (±1 dB)
    • Line: 10 Hz to 20 kHz (±0.1 dB)
  • Noise:
    • Mic: < -71 dB below +4 dBu output (150 Ohms source; 50 dB gain)
    • Line: < -78 dB below +4 dBu output (maximum gain)
  • CMRR:
    • Mic: > 60 dB
    • Line: > 60 dB, (50 Hz to 120 Hz)
  • Control Input: 0 to 10 Vdc or 0 to 10 k Ohms Linear
  • Attenuation Range: 0 to 90 dB (>90 dB at 0 Vdc control)
  • Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 50 mA
  • Dimensions: 0.7" H x 3" W x 1.6" D (1.7 x 7.6 x 3.9 cm)