Product Overview
Easily connect your legacy audio gear to the DANTE® network with the Line I/O to DANTE® Interface. This compact device integrates two channels of audio into the DANTE® network while converting DANTE® streams into analog signals. With rugged design and lockable connectors, it's perfect for stage use and fixed installations. Optional mounting brackets allow for flexible placement.
Neutrik NA-2O-DLINE Features:
- Connect analog audio equipment to a Dante® network
- Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
- AES67 compliant
- Improved Audio Parameters
- Enhanced ESD Protection
- LED Ring for Status Indication
- Extremely robust and compact design for rugged stage conditions
- Rack mountable
- Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
Neutrik NA-2O-DLINE Specifications:
- Product:
- Title: NA-2O-DLINE
- Product family: Line Out to Dante Interfaces
- Electrical:
- Power consumption: < 2 watts
- Power supply: PoE switch (Power over Ethernet) or PoE injector (according to IEEE 802.3af/at/bt)
- Mechanical:
- Dimensions (with rubber protection):
- l = 164 mm (6.3 inches)
- w = 82 mm (3.2 inches)
- h = 51 mm (2.0 inches)
- l = 151 mm (5.9 inches)
- w = 66 mm (2.6 inches)
- h = 41 mm (1.6 inches)
- Weight: 0.44 kg (1 pound)
- Environmental:
- Standard compliance:
- REACH EC 1907/2006
- Directive 2011/65/EU
- IEC 62368-1:2018
- IEC 62368-1:2023
- EN IEC 62368-1:2020+A11:2020
- UL 62368-1:2019
- UL 62368-1:2021
- CSA C22.2 No. 62368-1:19
- Ingress protection class: IP20
- Temperature range: –5°C to +60°C
- Storage temperature: –40°C to +150°C
- Dante specifications:
- Channels: 2 OUTPUTS (line level)
- Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
- Bit depth: 16, 24 and 32 Bit
- Latency: Depending on the network configuration, 1 ms (standard)
- Ethernet connection: 100 BASE-TX (PoE support)
- Analog audio output:
- Output impedance: < 150 Ohm
- Output level (balanced): 24 dBu max.
- Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
- Dynamic range: > 100 dB
- Signal-to-noise ratio: > 108 dB
- THD + noise: < 0.01 % @ + 4 dBu, A-weighting
- Crosstalk: -100 dB @ 20 kHz
