DPA 4166-OC-F-F03-MH 4166 CORE Slim Omni Flex Headset Mic, 90mm Boom, Beige, 3-pin LEMO

DPA's 4166-OC-F-F03-MH combines legendary DPA audio quality and reliability with a lightweight and flexible headset system. This microphone has an omnidirectional pickup pattern that delivers a natural vocal sound without the increased bass associated with directional microphones. The slim low-profile design of the capsule head makes it unobtrusive while delivering uncolored sound conducive to broadcast, theater, presentations, or on-camera use.

The 4166-OC-F-F03-MH has a flexible and lightweight two-ear headset that provides the ultimate in comfort over extended periods. It's easy to adjust to any ear size or head shape and the mic can be positioned on either side. Replacing a broken cable or connector is a snap because both are removable and field-replaceable. This also means that you can use the mic with multiple bodypack systems simply by purchasing the corresponding connector, no need to buy a new microphone.

The headset features a 90mm boom with Core amplification that yields an impressive 111 dB dynamic range that captures everything from a whisper to a scream. They will hear it all clearly with the 4166-OC-F-F03-MH.

DPA 4166-OC-F-F03-MH Features:

• Pristine audio quality
• Lightweight and flexible
• Easy mounting to the left or right
• Minimal visual impact
• Resistant to humidity
• Flexible adapter system fits most professional wireless systems

DPA 4166-OC-F-F03-MH Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB: 40 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range - Legacy: Typ. 97 dB
• Dynamic range - CORE: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: Lemo adapter
• Color: beige
• Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: Boom length: Normal: 120 mm (4.7 in), Medium: 100 mm (3.9 in)
• Cable length: 1.3 m (4.3 ft)
• Cable color: beige o
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Electromagnetic compatibility (EMC): Fully compatible
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%