Product Overview
Immerse yourself in world-class audio with the Neumann Ambeo Immersive Audio Small Room Bundle. You'll get eleven KH 120 II Studio Monitors, a pair of KH 750 DSP Subwoofers, and the MA 1 auto-calibration system that offers an out-of-the-box immersive production solution.
The KH 150 offers oa high degree of linearity with minimal distortion and a cat-like adaptability to diverse acoustic environments. Attention to detail and tight component tolerances yield a monitor that faithfully reproduces every nuance in your tracks, streamlining the mixing process and giving you accurate insight into the critical aspects of your productions. The included KH 750 DSP Subwoofer is the perfect compliment to your KH 120 IIs, adding tight, powerful low end with exceptional transients. With the proliferation of multi-channel audio systems, it's critical to hear the full extension of your low-end information. Standard full-range speakers alone can't tell you what's going on down there, but you'll hear it all with the 750s.
To ensure you get the most out of your system, the bundle includes an MA 1 automatic alignment microphone and software package. Developed in cooperation with Fraunhofer IIS, this cutting-edge system optimizes frequency curve, amplitude, and phase using advanced speaker calibration algorithms and an individually calibrated measurement microphone. The calibration data is then stored directly in your KH-series monitors, eliminating the need for plug-ins. It ensures optimal sound quality with convenient set-it-and-forget-it simplicity. This bundle is perfectly paired, and after calibration, you may never leave the mix position! Hear your mix, not your room. Lose yourself in the moment with the Ambeo Immersive Bundle.
Neumann Immersive Audio Large Room Bundle Features:
- MA 1
- Algorithms derived from decades of experience in aligning monitors
- Individually calibrated measurement microphone
- Room adaptive target curve
- For stereo setups with network-enabled Neumann monitors and any analog Neumann monitors using KH 750 subwoofers
- For multichannel setups with Multichannel Extension license
- For Mac and PC
- KH 150
- High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide
- Linear frequency response 39 Hz … 21 kHz (±3 dB)
- Linear phase response 105 Hz … 16 kHz (± 45°) with latency < 2,6 ms
- DSP engine allows for room adaptive calibration via Neumann’s MA 1
- Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
- May be combined with other KH line speakers in immersive/surround setups.
- KH 750
- Deep bass in a small space
- The perfect complement to KH 80 DSP, KH 120, KH 150 and KH 310
- Optional tools to align and operate a complete Neumann stereo system
- 256W, 105dB SPL
Neumann Immersive Audio Large Room Bundle Specifications:
- MA 1
- Microphone Type: Pressure Transducer
- Polar Pattern: Omnidirectional
- Frequency Response: 20 Hz - 20 kHz
- Max SPL: 132 dB
- Output Impedance: 50 ohms
- Signal to Noise Ratio: 67 dB (A-weighted)
- Self Noise: 27 dB (A-weighted)
- Sensitivity: 30 mV / Pa (-30 dB)
- Connector: XLR
- Dimensions: 4.60" x 0.90"
- Weight: 0.08 lbs
- KH 150
- Power supply: 100 to 240 V~, 50/60 Hz
- Power consumption (standby/idle): 0.3 W / 15 W
- Power consumption (full load): 320 W
- Dimensions (H x W x D)
- 345 x 225 x 273 mm
- 13.6" x 8.8" x 10.7"
- Weight: 8.0 kg
- Drivers (woofer, tweeter): 165 mm (6.5"), 25 mm (1")
- Temperature
- Operation and storage, unpacked: +10 °C to +40 °C
- Transport and storage, packed in original packaging: -25 °C to +60 °C
- Relative humidity
- Operation and storage, unpacked max.: 75% (non-condensing)
- Transport and storage, packed in original packaging max.: 90% (non-condensing)
- KH750
- THD+N: analog, digital: < -100dB; < -90dB
- Free field frequency response ±6dB: 16 … 800Hz
- Free field frequency response ±3dB: 18 … 750Hz
- Reproduction accuracy between 50Hz and 100Hz: 100%, 80%, 50% of subwoofers produced: n/a
- Self-generated noise at 10cm (with input gain set to 100dB SPL for 0dBu):
- Sine wave output with a THD < 0.5% @ 1m in half space: 95dB SPL (>70Hz)
- Bass capability: Max. SPL in half space at 3% THD @ 1m (averaged between 50Hz and 100Hz): 105.0dB SPL
- Max. long term SPL with pink noise @ 2.3m, in typical listening conditions (single / pair full range): n/a
- Max. long term SPL with pink noise @ 2.3m, in typical listening conditions (single / pair with subwoofer): n/a
- Analog input(s): 2 x XLR: analog electronically balanced
- Analog input impedance: >13kΩ
- Max. input level: < +24dBu
- Common mode rejection ratio (CMRR): > 56dB @ 15kHz
- Crosstalk (1kHz), level matching: < -90dB; ±0.1dB
- Volume control: via Neumann.Control software
- Volume control range; resolution: 0 … -∞dB; 0.1dB
- Analog dynamic range; THD+N: 119dB(A);
- Signal routing modes: Right; External Bass Management; 2 x LFE
- Analog output(s): 2 x XLR; analog electronically balanced
- Input gain control (sensitivity): +2 ... -12dB
- Output level control (output level in 1m based on 0dBu input level): 94; 100; 108; 114dB SPL
- Digital input(s): BNC (75Ω): AES3; S/P-DIF
- Digital output(s): BNC (75Ω): AES3
- Digital converter: resolution; design: 16 … 24-bit DAC; Δ∑
- Digital converter: sampling rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192kHz
- Dynamic range A-D-A: >120dB(A)
- Dynamic range D-A: >123dB(A)
- Digital sensitivity: -18dBFS = 100dB SPL @ 1m
- Latency: 1.5ms (A-D-A linear phase); 1.2ms (D-A linear phase)
- Delay: User adjustable delay range: 0 ... 100ms and 2 x 0 ... 20.8ms
- Delay: Resolution: time; distance: 0.1ms; 3.44cm (1 3/8”)
- Delay: Max. frames Audio-video synchronization (lip sync): 2.5(40ms) frames; 3(33ms) frames
- Delay: Time-of-flight maximum distance: 2 x 7.16m (23' 5")
- Controller design: Digital; active
- Crossover frequency: 80Hz fixed or 60 - 100Hz via Neumann.Control
- Crossover slope: 24dB/oct; 4th order
- Phase: 0; 45; 90; 135 under 0/180deg
- Equalization: via Neumann.Control software: 8 x full parametric IIR + low / high shelf global balance
- FIR phase correction: For connected analog loudspeakers: Linear phase (170Hz - 16kHz; +/- 45°)
- Protection circuitry: Driver (thermo limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection)
- Infrasonic filter: frequency; slope: 17.5Hz; 12dB/oct.
- Remote control: Neumann.Control software via an RJ45 connector carrying standard IP data
- Display: On; Normal Operation: Green LED
- Display: Identification: Amber LED
- Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Red LED
- Display: Bass Management on: Green LED
- Output power woofer amplifier (THD+N with limiter deactivated: 10%): 256W
- Mains Power Supply: input voltage; frequency: 100-240V; 50/60Hz
- Power consumption (230V/100V): Standby:
- Power consumption (230V/100V): Idle: 18W
- Power consumption (230V/100V): Full output: 410W
- In-rush current (Peak): 30A at 230VAC
- Standby: Disabled; 90mins (default); user defined in software
- Cabinet material: Wood cabinet, aluminum electronics panel
- Cabinet surface finish; color (front / back): Painted; metallic anthracite (RAL7021) / black (RAL9005)
- Operating conditions: +50°F to +104°F;
- Transport/storage conditions: -13°F to 158°F;
- Woofer: 10" with protecting black metal grille
- Product dimensions (HxWxD): 15 1/8" x 13" x 15 1/8"
- External net volume: 48.4liters
- Product weight: 43lbs
