Meyer Sound USW-112XP 1200W 12-inch Powered Subwoofer

The USW-112XP compact narrow subwoofer extends the USW family, offering a powerful bass performance in tight spaces with its impressive power-to-size ratio. Its compact rectangular design and slanted connector panel allow for flush mounting against walls, reducing installation depth to just 12 inches, including connectors.

Ideal for installations requiring high performance and a discreet aesthetic, the USW-112XP complements Meyer Sound’s ULTRA-X20XP and other Meyer Sound loudspeakers like the UP-4slim and UPM family. It operates within a frequency range of 35–140 Hz, delivering a linear peak SPL of 119.5 dB, measured in half-space at 4 meters.

The bass reflex cabinet incorporates a low-velocity port, based on the USW-210P design, for high efficiency and minimal port distortion. An open-loop, Class-D amplifier with built-in signal processing ensures phase and frequency correction, as well as driver protection.

Powered by IntelligentDC technology, the USW-112XP receives DC power and balanced audio through a single Phoenix™ 5-pin connector, eliminating the need for wiring conduits. This system supports long cable runs up to 150 feet with minimal SPL loss, using composite multi-conductor cables.

The USW-112XP's versatile enclosure allows for horizontal or vertical placement to suit installation needs. It comes equipped with M8 mounting points for optional U-bracket mounting on walls, ceilings, or trusses, and includes a 35 mm pole mount with M20 threads for added stability. The cabinet is constructed from premium birch plywood with a durable black finish and a powder-coated steel grille.

Meyer Sound USW-112XP Applications

• Multi-purpose Audio/Visual
• Corporate rental
• Houses of worship
• Conference rooms
• High-end private installations
• Retail spaces
• Theater

Meyer Sound USW-112XP Features

• High power-to-size ratio.
• Versatile design allows for vertical or horizontal placement.
• Compact and discreet form factor, fitting into tight architectural spaces with a depth of only 12 inches, including connectors.
• Clean, low-distortion output from a proprietary high-excursion driver and low-velocity port.

Meyer Sound USW-112XP Specifications

• Acoustical:
  • Operating Frequency Range: 35 Hz – 140 Hz
  • Frequency Response: 36 Hz – 125 Hz ± 4 dB
  • Phase Response: 45 Hz – 120 Hz ± 30°
  • Linear Peak SPL: 119.5 dB with >10 dB crest factor (M-noise), 119.5 dB (Pink Noise), 121.5 dB (B-noise)
• Transducer:
  • Low Frequency: One 12-inch cone driver; 3 Ω nominal impedance
• Audio Input:
  • Type: Differential, electronically balanced
  • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
  • Connector: Phoenix 5-pin male
  • Input Impedance: 10 kΩ differential between Audio (+) and Audio (–)
  • Wiring:
    • Pin 1: DC Power (–)
    • Pin 2: DC Power (+)
    • Pin 3: Audio Shield, Chassis/Earth
    • Pin 4: Audio (–)
    • Pin 5: Audio (+)
  • Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous
  • Input Level: Audio source must produce +20 dBV (10 V rms) into 600 Ω for maximum peak SPL
• Amplifier:
  • Type: Open-loop, Class-D
  • Total Output Power: 600 W peak
  • Distortion: THD, IM, TIM < 0.02%
  • Cooling: Convection
• DC Power:
  • Connector: Phoenix 5-pin male (provides power and audio connection)
  • Safety Rated Voltage Range: 48 V DC (Meyer Sound MPS-482HP or MPS-488HP Power Supply required, NEC ANSI/NFPA 70 Class 2 Wiring Approved)
• Physical:
  • Dimensions: W: 13.5 in (343 mm) x H: 23.5 in (597 mm) x D: 12 in (305 mm)
  • Weight: 43 lb (19.5 kg)
  • Enclosure: Premium multi-ply birch with slightly textured black finish
  • IP Rating: IP54 (with weather protection and rain hood installed)
  • Protective Grille: Powder-coated, round-perforated steel
  • Rigging: Two integrated M8 threaded points, 35 mm Pole Mount with M20 thread, optional U-bracket for wall, ceiling, or truss mounting