AKG PCC160 [Restock Item] PCC-160

An industry standard with high SPL handling and tone-shaping features.

The PCC160 is a professional boundary layer microphone and an industry-standard stage floor microphone that’s capable of withstanding up to 120dB SPL without distortion. A bass-tilt switch allows the user to tailor the low-end response for particular applications. PCC® (Phase Coherent Cardioid®) technology uses diaphragms so small that any phase cancellations are above the audible range. This results in a wide, smooth frequency response free of phase interference. The PCC160 uses a supercardioid polar pattern that improves gain before feedback and reduces unwanted room noise from the rear.

This is a Restock item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

AKG PCC160 [Restock Item] Applications:

AKG PCC160 [Restock Item] Includes:

AKG PCC160 [Restock Item] Features:

• • Supercardioid polar pattern
  • Phase Coherent Cardioid tech for wide, smooth frequency response
  • Three-position bass-tilt switch for optimized body noise suppression
  • Extremely low profile for inconspicuous placement on stage floor
  • Finely crafted, rugged housing

AKG PCC160 [Restock Item] Specifications:

• • Type: Phase Coherent Cardioid
  • Element: Electret condenser
  • Polar pattern: Half-supercardioid (supercardioid in the hemisphere above the primary boundary)
  • Impedance: 150 ohms nominal (85 ohms actual), balanced. (Recommended load impedance 1000 ohms or greater.)
  • Open-circuit sensitivity: 22mV/Pa (–33 dB re 1 V/Pa)
  • Power sensitivity: –31 dB re 1 milliwatt/Pa/–123 dB mEIA
  • Equivalent noise level (self noise): 22 dB typical (0dB = .0002 dyne/cm2), A-weighted
  • S/N ratio: 72 dB at 94 dB SPL
  • Maximum SPL for 3% THD: 120 dB SPL
  • Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 of output connector
  • Cable: 15-foot, black, two-conductor shielded cable with Switchcraft TA3F connector and A3M connector
  • Operating voltage: Standard phantom power: 12 to 48 volts DC positive on pins 2 and 3 with respect to pin 1
  • Current drain: 4 mA nominal
  • Materials: All steel body construction
  • Finish: Black
  • Net weight: 11.5 oz. (326 g)
  • Dimensions (LxWxH): 6.7" x 3.2" x 0.84" (17.018 x 8.128 x 2.13 cm)