Product Overview
ETC’s Desire Series D60XTI delivers the powerful control of the x7 color system™ along with the long-throw capabilities of a D60, tailored for permanent installations. Its IP66 rating ensures it’s prepared for both indoor and outdoor mounting, wherever you need it. The Selador® x7 color system provides an extensive spectrum of saturated and tinted colors, offering the widest range of spectrally-balanced options available. The D60XTI features a robust die-cast housing, quiet fanless operation, and versatile lens choices that can be swapped out on-site. The D60XTI Vivid™ model brings a balanced x7 color system array, ideal for versatile use as a color-changing wash luminaire.
- GENERAL:
- Easy setup via any RDM device, such as ETC Gateways and Gadget
- 60 LED white-light wash luminaire (static white luminaires)
- ETL listed to UL1598
- IP66-rated for exterior wet-location use
- Data termination board for easy installation (included)
- Meets 3G ANSI C136.31 Vibration standard for bridge applications
- PHYSICAL:
- Rugged die-cast, all-metal housing
- Accessory ring for installation of secondary lenses
- Available in black (standard), white or silver (optional) or custom colors (contact factory)
- Hanging yoke standard. Cable diameter: power 0.36”/ data 0.34”
- Effective Projected Area (EPA): 0.95
- ELECTRICAL:
- 100VAC to 240VAC 50/60Hz universal power input
- Waterproof, 72” outdoor-rated power lead
- Up to 10 fixtures (15A max) may be fed on the same circuit
- Requires power from a non-dimmable source
- Inrush - 120V: 46A (First half-cycle) - 240V: 77A (First half-cycle)
- LED:
- 50,000-hour LED life (50,000 hours to 70% intensity)
- 60 LUXEON® Rebel LED emitters
- Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
- COLOR:
- Exclusive x7 color system seven-color LED array
- Broad spectrum color interacts seamlessly with conventional sources
- Beautifully illuminates skin tones and other objects for a natural appearance and high color rendering
- Exclusive red-shift option emulates tungsten dimming performance (not available on static white luminaires)
- Studio HD array uses warm and cool white light emitters with additional deep-color emitters to allow variable color temperature from 2700K-6500K
- Studio Tungsten and Studio Daylight provide good color rendering at very high brightness
- OPTICAL:
- Primary field angle of 17° and beam angle of 8°
- Secondary lenses available for multiple beam spread options
- Lenses must be ordered separately
- CONTROL:
- DMX512 in and thru via termination board (included)
- See DMX Input Channel Profilesfor operation modes
- 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
- RDM functionality for address and setting changes
- THERMAL:
- Ambient operating temperature of -4° to 104°F (-20° to 40°C)
- Active electronic thermal management for droop-free operation
- Noiseless, fan-free convection cooling for acoustically sensitive installations
- Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around luminaire housing
- CONTROL OPTIONS:
- User settings on D60XTI luminaires allow multiple operational modes and settings for console operation via DMX protocol.
- Some of the setting options are:
- Multiple DMX options ranging from a simple RGB profile – which effectively controls all seven LED colors via three channels – to nine-channel direct color and intensity control
- Multiple dimming curve options
- Preset colors and sequences for stand-alone (no console required) operation White point selection – white light and color behavior based on a specific color temperature white light (i.e. 3200K, 5600K, etc)
- Loss of data behavior options – instant-off, hold last look for two minutes, etc.
- Output modes – three output options that offer the user a choice between maximum output and maximum consistency See the user manual for a complete explanation of all of the control settings and options for the D60XTI
