Intercoms, Two-Way Radios

The Lectrosonics A500RA23 is a UHF antenna with a right angle BNC connector for use with Lectrosonics Wireless products using the Block 23 operating frequencies, which covers 588.80 - 607.900 MHz and 614.100 - 614.300 MHz.

The Clear-Com EB7-4W 4-Wire Option module can be added to the KB-702, KB-702GM, KB-701, and HB-702 products. This product allows the speaker or headset station to be operated over longer distances than are possible with a standard Clear-Co ...

Point Source Audio's CM-i3 is the world's first modular intercom headset. This intercom headset has a patented slim-line design that allows for three listening modes. Rather than having to remove the entire headset to check environmental s ...

The Advanced Network Devices IPSIGNL-RWB is our largest IPclock. This clock is specifically designed for large rooms or auditoriums. It has two 8 inch speakers that allow for increased maximum volume and its larger text display makes readi ...

The AKG HSC271 professional over-ear, closed headset is a standard for intercom, ENG/EFP work and video production. It is based on the successful K271 MKII Studio headphones combined with a high-performance condenser microphone. The flexib ...

The Anchor Audio RM-500 is a rackmount kit for the WM-500 WingMAN interface station, which is used with Anchor's PortaCom and ProLink intercom systems.

The Studio Technologies Model 46A is designed to interface 2-wire full-duplex party-line (PL) intercom circuits with 4-wire audio circuits associated with matrix intercom systems. Other specialized audio system interfacing applications can ...

The Studio Technologies Model 47A is designed to interface 2-wire full-duplex party-line (PL) intercom circuits with 4-wire audio circuits associated with matrix intercom systems. Other specialized audio system interfacing applications can ...

Atlas-Sound’s VPCS Series 3-gang intercom systems - patent pending - provide superior intelligibility for one or two-way communication in high-security applications. Units are designed for installation in detention, correctional, and ins ...

This coaxial design is approximately 48 inches in overall length, with an right angle BNC connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag specifying its block. It is especi ...

The Anchor Audio BP-500L Listen-Only Beltpack is for use as part of a ProLink 500 intercom system, and features a compact and portable design that offers operation without the need for a base station. A full ProLink 500 system can support ...

CoachComm TMA-ANTSYS-09C Directional Antenna Kit Includes: 9 dBi directional antenna kit:(2) x 9 dBi directional antennas (w/mounting brackets) (1) x L-bracket (w/ (2) x 5/8" (15.9 mm) dia.mounting posts) (2) x10 ft (4.5 m) coax cables (1) ...

The Studio Technologies Model 211 Announcer's Console is designed to serve as the audio control center for announcers, commentators, and production talent. The tabletop unit is suited for numerous applications including on-air television s ...

RP-TNC to N coaxial low loss RF cable, 50 feet in length

PC-ANTCAB-20UF: RP-TNC to N coaxial low loss RF cable, 20 feet in length

RP-TNC to N coaxial RF cable, 10 feet in length

The RTX IC-6SX Source Assignment Panel is a 6 IN by 12 OUT routing switch. Users can slide switches on the IC-6SX to different positions and combine or isolate any intercom stations in any combination. RTS IC-6SX Router Panel Features: Pas ...

The Lectrosonics IFBT4-VHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The transmitter can be used as a stand-alone dev ...

Camplex BLACKJACK-APTT2 is an Active Push-To-Talk inline remote for use with the Blackmagic Design ATEM Camera Converter and includes options for female/male and 4pin/5pin connectors for professional PL intercom headsets, depending on mode ...

fThe Camplex BlackJack-PTT is a Push-To-Talk inline remote for use with the Blackmagic Design ATEM Camera Converter and includes options for female/male and 4pin/5pin connectors for professional PL intercom headsets, depending on model. Th ...

The Clear-Com® LQ-R4W8 is a multi-interface unit that facilitates IP communications for extension of up to 8 ports of 4-wire, SIP and IVC-32-HX connectivity simultaneously over any IP network (LAN, WAN & Internet). Constructed in a 1RU pa ...

The HUB715CYB from Eartec is a complete, full-duplex wireless intercom system based around a HUB mini base station, with (5) UltraLITE Double Remote Headsets, (1) UltraLITE Single Remote Headset, (1) Cyber Headset for HUB, (7) Lithium Batt ...

Telex PH16-A4M is a dual-sided full cushion hearing protection headset with an A4M connector. The PH-16 is a dual-sided monaural headset with noise-canceling dynamic microphone. It fits under a helmet and has an EPA rated NRR of 24dB. The ...

Clear-Com's LQ-R2W4 is a four channel Partyline IP communications interface that's designed for extending Partyline audio communications and call signaling to remote sites over IP networks (LAN, WAN, Internet). Using 3 pin XLR female conne ...