Clear-Com LQ-R2W4 4 Channel Partyline IP Interface

Clear-Com's LQ-R2W4 is a four channel Partyline IP communications interface that's designed for extending Partyline audio communications and call signaling to remote sites over IP networks (LAN, WAN, Internet). Using 3 pin XLR female connectors for Partyline ports, this model supports four channels of audio and signaling which can be routed to up to five other LQ units.

With the LQ-R2W4 you can link over IP into Eclipse frames via IVC-32-HX and HelixNet via a HLI-ET2 module, with licensable hosting of up to 8 Agent-IC clients and 8 lines of IP telephony (SIP) per unit. The general purpose of the Clear-Com LQ interfaces is to connect and route signals from multiple intercom systems and audio devices from point-to-point or point-to-multi-point, virtually anywhere over the secure IP network. 2-wire partyline devices such as Clear-Com’s or any industry-standard intercom system break away from traditional cabling and take advantage of available IP infrastructure for connecting to other 2-wire systems.

Need to add an intercom user position across campus and in the next town? Just interface your existing 2-wire partyline system, regardless of brand, with LQ-R2W4 devices. Place the same LQ device at the desired position, then connect the 2-wire beltpack directly into the LQ device. Once devices are networked together with the Core Configuration Manager, the open communication link between these devices will allow everyone on the intercom network to talk or listen, depend on the configuration.

Includes

• Two (2) inline PSU bricks

Features

• 4-Port 1RU Panel for 2-Wire Interfacing
• Intercom-over-IP: routing intercom and audio signals over IP networks
• Up to 6 LQ devices can be networked to create standalone partyline intercom group
• Supports up to 8 SIP client connections per LQ device (license required)
• Supports up to 8 Agent-IC clients per LQ device (license required)
• Connects to HelixNet via HLI-ET2 over LAN or WAN
• Add up to 24 ports of audio I/O per HelixNet Main Station by connecting to LQ Series
• Adjustable bandwidth on a per port basis
• 2-wire powering, termination and auto-nulling
• Compatible with Clear-Com and RTS systems
• Female and Male XLR connectors at each port
• Network-friendly OPUS Codec
• Browser-based Core Configuration Manager application
• Networked Control Events for multi-unicast one-to-many routing

Specifications

• Audio:
  • Resolution: 12 bit
  • Sample Rate: 24KHz
  • Frequency Response: 100 – 12KHz
  • CODEC: OPUS
• Partyline Audio:
  • Input Gain: -3dB to +3dB
  • Output Gain: -3dB to +3dB
  • Network Setting:
  • Bit Rates: 16, 32, 48, 64, 128Kbps
  • Packet Size: 5, 10, 20, 40, 60ms
  • Jitter Buffers: 0 – 1000ms
• Connectors:
  • Network/LAN: EtherCON/RJ45 (female)
  • Partyline Audio I/O: 3 Pin XLR (female)
• Partyline Output Current:
  • Type: Clear-Com & RTS TW
  • Local DC Powered: 250mA per pair of PL ports (500mA total)
• Power Supply:
  • In-line supply with sleeve locking connector
  • Input: 100-240V, 50-60Hz, 1.4A MAX
  • Output: DC 12V, 5A, 60W MAX
• Environmental:
  • Operating Temperature: +32°F to +104°F (0°C to +40°C)
  • Storage Temperature: -67°F to +158°F (-55°C to +70°C)
  • Humidity: 90%, non-condensing
• Dimensions (WxHxD: 19in x 1.79in x 8.8in (483mm x 46mm x 224mm)
• Weight: 4.29lbs (1.95kg)