Networked Digital Audio Systems & Snakes

5' Excellines Wordclock Cable Pro Co's WDC-5 is a 5-foot 22 AWG Excellines co-ax cable designed for connecting Wordclock devices. Features Neutrik NBNC75BLP9 connectors.

The IPUSBD-16 Dante™ network audio device provides 16 x 16 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB through redundant RJ-45 ports. The ...

The IPUSBD-8 Dante™ network audio device provides 8 x 8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB through redundant RJ-45 ports. The US ...

A studio AD/DA converter of the highest quality, the ADI-2 DAC FS from RME is the home and hi-fi optimized version of the ADI-2 Pro (sold separately). It includes an improved SteadyClock, fine-tuned-to-perfection analog circuitry, updated ...

Delivering superior fidelity and a wealth of input and output options, RME's ADI-2 Pro FSR Black Edition was created for those who demand the highest level of performance from every stage of the analog to digital journey and back. With con ...

With its ultra-flat frequency response and lightning-fast slew rate, the DX32 Prime input module faithfully captures every detail of your source with clarity and precision. The DX32 connects via a single Cat5e cable and brings 8 channels o ...

Bogen URG16-16-160 Logic Expander 16 In, 16 Out Logic Expander with RS485 link. For use with IDA8 Systems only.

Bogen URGP-16I-16O Evacuation Input/Output Extension Adds 16 evacuation inputs and outputs to an IDA8 System.

The MuxLab Digital Audio Converter (500080) is designed to perform the conversion of a single LPCM-encoded Digital Coax (S/PDIF) or Digital Optical (TOSlink) audio signal into a conventional left/right analog audio output (RCA). This funct ...

The ISA ADN2 adds 2 channels of Dante, AES3 (AES/EBU), ADAT TOSLINK, and SPDIF connectivity to your IAS One microphone preamp, complete with operation at sample rates up to 24-bit/192kHz. The ADN2 allows synchronization to multiple digital ...

The ISA ADN8 adds 8 channels of Dante, AES3 (AES/EBU), and ADAT TOSLINK connectivity to your IAS One microphone preamp, complete with operation at sample rates up to 24-bit/192kHz. The ADN8 allows synchronization to multiple digital source ...

Designed around OCA (Open Control Architecture) Bosch Building Technologies' OMNEO is a public standards-based media networking architecture that promotes device interconnectivity. This full-duplex (simultaneous two-way) interface card joi ...

A168 STAGE Portable 16 input 8 output IO Expander 16 mic/line in and 8 line out I/O Expander, using A3232 network protocol and providing additional I/O anywhere on the network. Up to two A168STAGE can be daisy-chained via A3232, or the sec ...

A Thunderbolt 3 and USB 2.0 Audio Interface with Onboard DSP, Antelope's Galaxy 64 Synergy Core was engineered to be the beating heart of your production system. With Dante™, HDX, and Thunderbolt™ connectivity, there's no more need for ...

Receive and distribute CobraNet audio across your network with the IED1522AIOLR audio I/O module. The module is capable of simultaneously receiving network audio, sending it to two balanced analog outputs while inputting two mic/line balan ...

The DD-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-pan ...

The DDB-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-pa ...

The DDB-RN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted usi ...

The DDS-RN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted usi ...

The DDB-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus t ...

The DDB-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus t ...

The DDS-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus t ...

The DD-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-pan ...

The DDB-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-pa ...