Accessories, Capsules for Wireless

Unlike earsets that are hard-wired from the mic to the connector, our cables quickly and securely snap into the E6 Earset to link the mic to hardwired or wireless systems. E6 cables and E2 cables are not interchangeable. Note: Product show ...

This standard RG58 BNC extension cable measures at 50 feet long, perfect for sending signal from a front-mounted antenna connector (such as the Galaxy Audio CN-BNCPM, sold separately) to a directional antenna paddle like Galaxy Audio's ANT ...

Bundling the ATW-CHG3N Networking 2-bay charging station with the AD-SA1230XA AC adapter, the ATW-CHG3NAD package from Audio-Technica is designed for use with their 3000 Series ATW-T3202 handheld, and ATW-T3201 body-pack transmitters (tran ...

Bundling the ATW-CHG3 two-bay charging station with the AT8687 link kit, the ATW-CHG3EXP package from Audio-Technica is designed for use with their 3000 Series ATW-T3202 handheld, and ATW-T3201 body-pack transmitters (sold separately). Thi ...

Get all the accessories you need to tailor your Point Source lavalier to any situation with the Co-LAV-KIT. The soft protective carry case holds additional clips, caps, windscreens, and mic holders in multiple colors. Change up the look or ...

RF Venue's OPTIX Series 3 is a high performance RF to fiber optic conversion system designed to enable the remote placement of wireless audio antennas. The OPTIX Transmitter module converts RF signals from an antenna source into a singlemo ...

The RPM40FC from Shure is a 10-pack of Flat Frequency Caps designed for use with the TwinPlex™ series TL45, TL46, TL47 subminiature lavalier mics, as well as the TH53 subminiature headset microphone. They are interchangeable sweat- and m ...

The H1 magnet clip is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking. Using the magnet, the clip can be mounted almost every ...

The TOA Wireless antenna distributor WD-5800 is designed to be used in conjunction with VHF / UHFband system. It comes with two distribution channels, in which two input signals are mixed and distributed to four outputs. The WD-5800 also h ...

The ZH1 pin mount from Sennheiser that can be used to attach the MKE 1 clip-on microphone to any article of clothing.

DPA Microphones' MMP-ER/ES Modular Active Cable Preamplifier is designed for use with hanging mics as well as low-profile table or instrument mics that employ any of the modular capsules in their d:dicate™ Microphones Series. It comes wi ...

The AT8464x is a Dual-Ear Adapter Kit from Audio-Technica that enables you to convert a single-ear MicroSet® headworn microphone, e.g., the BP892x, BP893x, or BP894x mics (sold separately), into a dual-ear mount unit, enhancing stability ...

Lectrosonics' ALP690 is a high-performance LPDA (log periodic dipole array) antenna that comes with a bypassable, onboard RF amplifier that's ideal for use with wireless microphone receivers either for on-location or in-studio production. ...

From Galaxy Audio, the CBLATCH Headset microphone cable is specifically compatible with ESM8 and HSM8 microphones.

Sennheiser's CL 1 PP is a meter long antenna cable. Sennheiser CL 1 PP Specifications: Cable type: Antenna Length: 1 m

The BPCB-cT4 is a detachable/replaceable 55" (1.4m) black mic cable from Audio-Technica that fits all their BP892x, BP893x and BP894x earset models (all sold separately). It's terminated for Shure® wireless systems (also sold separately) ...

The H6CABLEL-XLR from Countryman is a hardwired XLR snap-on cable that is suitable with H6 headsets and comes in light beige. Unlike headsets that are hard-wired from the mic to the connector, Countryman H6 Headset Snap-On Cables quickly a ...

Battery Cover for use with SK5212 body pack.

The BA 62 is a rechargeable battery pack for the Sennheiser SK-6212 bodypack transmitter. It has a 12-hour operating time and must be recharged using the Sennheiser LM 6062 or L 6000 charging units. Sennheiser BA 62 Specifications: Output ...

The CA-6042-DC is a DC input cable with Hirose connectors for use when connecting the EK-6042 to an external power supply.

Sennheiser's CABLE-II-X5 is a two meter, Aramid reinforced, straight copper cable with a coiled segment and XLR-5M connector. Sennheiser CABLE II-X5 Specifications: Compatability: HMD 300 PRO HMD 301 PRO HMD 26-II HME 26-II (Not HME 26-II- ...

Sennheiser's CBL1015 is 100 feet of RG59 Coax cable plus 2 18AWG wires for connecting the Sennheiser SI 1015 to the SZI 1015.