Product Overview
Enjoy high-fidelity digital wireless in an easily expandable system
The ATW-1101/H configuration includes the ATW-R1100 receiver and ATW-T1001 UniPak® body-pack transmitter, along with the PRO 8HEcW headworn microphone.
System 10
Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation; easy setup; and clear, natural sound quality. Operating in the 2.4GHz range, far from TV and DTV interference, this advanced package offers extremely easy operation and instantaneous channel selection. Up to 8 channels may be used together without any frequency coordination problems or group selection issues. The system's receivers and transmitters offer an easy-to-read digital ID display, and ensure clear communications by providing 3 levels of diversity assurance: frequency, time, and space.
- Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication.
- Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference.
- Space Diversity uses 2 discreet antennas on each transmitter and receiver to maximize signal integrity.
Includes
- ATW-R1100 receiver
- ATW-T1001 UniPak bodypack transmitter
- PRO 8HEcW headworn microphone
- AT8139S small microphone windscreen
Features
- Includes ATW-R1100 receiver and ATW-T1001 UniPak bodypack transmitter
- Includes PRO 8HEcW headworn microphone
- Digital 24-bit / 48kHz wireless operation
- 2.4GHz range completely free from TV interference
- Frequency, Time and Space diversity assurance
Specifications
- Overall System:
- Operating Frequencies: 2.4GHz ISM band
- Dynamic Range: > 109dB (A-weighted), typical
- Total Harmonic Distortion:
- Operating Range: 30m (100'). typical, open range environment with no interfering signals
- Operating Temperature Range: 32°F to 104°F (0°C to +40°C), note: battery performance may be reduced at very low temperatures
- Frequency Response: 20Hz - 20kHz, depending on microphone type
- Audio Sampling: 24-bit / 48kHz
- ATW-R1100 receiver:
- Receiving System: Diversity (frequency/time/space)
- Maximum Output Level:
- XLR, balanced: 0dBV
- ¼" (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240VAC (50 / 60Hz) to 12VDC, 0.5A (center-positive) switched mode external power supply
- Dimensions (W x H x D): 7.48" x 1.82" x 5.06" (190.0 x 46.2 x 128.5mm)
- Net Weight: 10.2oz (290g)
- ATW-T1001 UniPak® transmitter:
- RF Output Power: 10mW
- Spurious Emissions: Following federal and national regulations
- Input Connection: 4-pin Locking Connector:
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Batteries (sold separately): (2) 1.5V AA
- Battery Life: > 7 hours (alkaline), depending on battery type and use pattern
- Dimensions (W x H x D): 2.76" x 4.21" x 0.98" (70.2 x 107 x 24.9mm)
- Net Weight (without batteries): 3.5oz. (100g)
- PRO 8HEcW headworn microphone:
- Element: Dynamic
- Polar Pattern: Hypercardioid
- Weight: 60g
- Dimensions:
- Microphone: 0.80" (20.4mm) diameter
- Headset: 4.72" (120mm) nominal at widest point, 3.17" (80.5mm) flexible boom
- Output Connector: 4-pin HRS-type on cable
- Cable (L x Dia): 7.2' x 0.11" (2.2m x 2.8mm), miniature audio cable permanently-attached between microphone and connector for use with Audio-Technica UniPak® body-pack transmitters
- Note: further information can be found within the "System 10 User Manual" located under the "Documentation" tab above.