Doug Fleenor Design E8ANL-DIN Ethernet Interface with Eight Analog Outputs, 0-10V

With eight analog outputs and a single DMX512 output, E8ANL-DIN is a dynamic Ethernet interface. Configure easily with the built-in webserver to connect to standard Ethernet (sAcn or ArtNet). Each of the eight 0-10V analog outputs is capable of sourcing or sinking modes up to 10mA without selection adjustments or modifications. Output channels have individually dedicated common terminals for easy field wiring and are isolated from the input (not isolated from each other). Both the DMX512 and analog connections are on pluggable Phoenix terminal blocks. Intuitive indicator lights for Power, Signal, and Mimic 1 assist for diagnostics, address verification, and operation. E8ANL-DIN mounts easily on a standard 35mm Top Hat Din rail.

Features

• Eight Analog Outputs capable of sourcing or sinking up to 10mA
• One DXM512 Output
• Built-in Webserver for Configuration
• LED Indicator lights for Power, Signal, and Mimic 1
• Mounts on standard 35mm top hat DIN rail

Specifications

• Input circuit: 802.3 Ethernet compliant input (LAN8720)
• Input signal: ArtNet and sACN (E1.31) Ethernet protocols
• Isolation: Ethernet/power input is isolated from the analog/DMX512 outputs
• Power Input:
  • Ethernet RJ-45 (aka 8P8C) with 802.3af PoE (Power over Ethernet) capabilities
  • Two-position terminal block for optional 18 to 18 VDC supply power
  • Output connectors:
    • Analog: Two 8-position pluggable terminal blocks (each terminal block contains four outputs and four commons)
    • DMX512: One 3-position pluggable Phoenix terminal block
  • Indicator Lights:
    • POWER- Standard On/Off
    • MIMIC 1- Mimics the intensity of Output 1
    • SIGNAL- Illuminates when an input signal is present or flashes during testing
  • Configuration: Built-in Webserver (after after being discovered by DFD Node Discovery, available for download at http://www.dfd.com/NodeDisc.html).
  • Dimensions: 5"x 3.5” x 2.5"
  • Weight: 5.5 oz
  • Mounting:
  • Black DIN mounting tray mounts on standard 35 mm “top hat” DIN rail
  • Optional pre-mount with a NEMA 1 electrical enclosure (E8ANL-DIN-JBOX, sold separately).