Radial Engineering DiNET DAN-RX2 2-Channel Dante/AES67 Network Receiver

A road-worthy digital network audio receiver, the DiNET DAN-RX2 from Radial Engineering is capable of converting 2 channels of digital audio to analog, allowing routing to any location from a Dante or AES67 compliant network.

It features balanced XLR outputs that include a ground lift, and a separate headphone amp with its own level control is included for local testing or personal monitoring. The integrated RJ45 network connection provides compatibility with Neutrik etherCON connector carriers, preventing accidental disconnection and protecting cable terminations. Additionally, it includes redundant powering that's available for use during critical applications, simultaneously employing both the included external power supply together with Power over Ethernet (PoE). The DAN-RX2 is rack-mountable aboard standard 19" equipment racks with the optional SA series rack-mount adapter kit (sold separately).

Features

• Stereo analog output device for Dante networks
• Balanced XLR outputs for connection at mic or line level
• Built-in headphone amplifier for personal monitoring
• 24-bit/96 kHz digital to analog conversion
• Compliant to AES67 specifications

Specifications

• Audio Circuit Type: High-current balanced active output device
• # of Channels: 2
• Frequency Response: 20 Hz to 20 kHz
• Dynamic Range: >100 dB
• Gain: +18 dBu max @ 0 dBFS
• Total Harmonic Distortion: 0.007% @ -6 dBFS
• Bit Depth: 24-bit
• Sample Rate: 44.1 / 48 / 88.2 / 96 kHz
• Input Connector: RJ45 Ethernet with locking etherCON (Dante, AES67 signal)
• Output Connectors: 2 x XLR male, 1 x 1/8" TRS, 2 x 1/4" TRS
  • Output Impedance: 150 Ω
• Channel Noise: -108 dB
• Channel Separation: >75 dB
• Power Connection: 15VDC 400mA adapter included, and/or PoE
  • Power Consumption: 1.25W
  • Power over Ethernet (PoE): Class 1 IEEE 802.3af
• Construction: 14-gauge steel
• Finish: Durable powder coat
• Conditions: For use in dry locations only, 5-40°C
• Dimensions: 2" x 6" x 4.5"