Countryman I2CS05-AX Instrument Mic for Shure: Evolution, Cardioid

Built from the ground up to offer smooth frequency response, a precise polar pattern, and low noise, Countryman's I2 Instrument Microphone features deep nulls along with natural on- and off-axis response. Thanks to its tiny form factor, it's ideal for distance miking that is virtually invisible on camera, and versatile close-miking techniques are enhanced thanks to its Standard gain configuration. The combination of small size and sonic precision makes it ideal for X-Y, M-S, and other techniques that rely on accurate coincident positioning and consistent patterns. Also available in an Omnidirectional configuration (sold separately). Additionally, added mounting/positional versatility can be achieved through the use of many available specifically-designed instrument mounts and clips (sold separately).

This is the I2 for Shure Wireless Systems with the TA4F Connector, with grounded metal shell for better RF immunity. It is compatible with the following Shure product: AXT100+, BLX1, FP1, GLXD1, PG1, PGX1, PGXD1, QLXD1, SLX1, UC1U, LX1, ULXD1, UR1, UR1M.

Countryman I2CS05-AX Includes:

• I2 Microphone with hardwired TA4F connector
• Basic Clip
• Windscreen
• Carrying Case

Countryman I2CS05-AX Features:

• Unparalled Precision
• Complete Control
• Vibration Damping
• Compatibility (transmitters all sold separately):
  • Shure AXT100+, BLX1, FP1, GLXD1, PG1, PGX1, PGXD1, QLXD1, SLX1, UC1U, LX1, ULXD1, UR1, UR1M
  • Carvin: UX16-BP
  • JTS: All with TA4F compatibility
  • Trantec: S5

Countryman I2CS05-AX Specifications:

• Connector: Hardwired TA4F
• Cable length (wireless): 5ft
• Polar Pickup Pattern: Cardioid
• Frequency Response: 50 Hz to 20 kHz
• Overload Sound Level: 150 dB SPL at 1% THD
• Output Impedance: 600 Ω +/- 2% balanced, transformerless; will drive load impedance without distortion at full rated SPL
• Equivalent Acoustic Noise: 29 dBA
• Power Requirements: 6V to 50V Phantom at 4mA; voltage below 24V will result in reduced overload SPL
• Sensitivity (standard, for close miking): -56.5 dBV/Pa (1.5 mV/Pa) at 1 kHz
• Dimensions (excluding cable strain relief): 9/32" x 7/16" x 5/32" (7 x 10.5 x 3.5mm)