Countryman I2HH05AX-VKIT I2 Violin kit, wired for Shure

Countryman offers the I2 Violin and Viola Microphone, which has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response.

Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by the included Violin and Viola Mount, which sits securely behind the bridge.

Instrument-specific mounts for the I2 provide positioning freedom, allowing you to direct the microphone pattern to capture the natural tone of your instrument.

Countryman I2 Instrument Microphone mounts are designed to minimize vibration noise, including the use of viscoelastic damping materials to reduce transmitted shocks and key noise for clear audio recordings.

The I2 maintains excellent pattern control and frequency response at all angles, for uncolored recordings and reduced feedback issues.

This is the I2 for Shure Wireless Systems with the TA4F Connector, with grounded metal shell for better RF immunity. It is compatible with the following Shure product: AXT100+, BLX1, FP1, GLXD1, PG1, PGX1, PGXD1, QLXD1, SLX1, UC1U, LX1, ULXD1, UR1, UR1M.

Countryman I2HH05AX-VKIT Includes:

• I2 Microphone
• I2 Violin Mount
• Windscreen
• Carrying Case

Countryman I2HH05AX-VKIT Specifications:

• Frequency Response
  • Omnidirectional: 20 Hz to 20 kHz
  • Directional: 50 Hz to 20 kHz
• Overload Sound Level: 150 dB SPL at 1% THD
• Ouput Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
• Equivalent Acoustic Noise
• Omnidirectional: 25 dBA
• Directional: 29 dBA
• Power Requirements: 6V to 50V Phantom at 4mA. Voltage below 24V will result in reduced overload SPL
• Sensitivity: 1.4 mV/Pascal
• Dimensions: 9/32" x 7/16" x 5/32" (7mm x 10.5mm x 3.5mm) excluding cable strain relief