DPA 4062-OC-C-F03 4062 Omni Mic, Extreme SPL, Beige, Lemo 3 pin

DPA's reputation for crafting rugged microphones is legendary, and the 4062 is no exception. The 4062-OC-C-F03 is a beige Omnidirectional microphone with a 3-pin Lemo cable termination and has been adjusted to operate at extreme SPL (Sound Pressure Levels). The higher SPL capability allows the microphone to handle up to 154 dB before clipping so feel free to mic the drums and brass section with the 4062-OC-C-F03.

Extremely resistant to sweat and humidity thanks to a dual vent design, the 4062 is also equipped with a kevlar-reinforced cable relief built to withstand the rigors of everyday use in demanding applications.

Due to its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve high-quality pickup. The 4062 comes with a pair of boost grids that can be used to shape the gain structure to the application. The soft boost is intended for use when the mic is mounted on the performer's head for a natural sound. When chest placement is required, the high boost grid is ideal as it boosts the frequencies around 12kHz. The grids can be removed and cleaned.

DPA 4062-OC-C-F03 Features:

• Exceptional audio quality
• Uniform, consistent sound between DPA mics
• Extremely rugged and reliable
• Diminutive size made for flexible and easy concealment
• Large selection of clips, windscreens, grids and other accessories
• Modular adapter system fits most professional wireless systems

DPA 4062-OC-C-F03 Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 1 mV/Pa; -60 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 33 dB(A) re. 20 µPa (max. 37 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 45 dB (max. 49 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range - Legacy: Typ. 90 dB
• Dynamic range: Typ. 106 dB
• Max. SPL, THD 10%: 154 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: 3-pin LEMO
• Color: Beige
• Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 12.7 mm (0.5 in)
• Cable length: 1.8 m (5.9 ft)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%