DPA 4188-DC-F-B10-LE 4188 CORE Slim Directional Flex Earset,120 mm Boom, Black, TA4F

DPA's brown 4188 single-ear slim flex earset microphone is designed for use in stage or broadcast settings where minimal visual intrusion is preferred. Equipped with a 120mm flex boom arm, the 4188-DC-F-B10-LE model is black and comes with a hardwired TA4F connector for use with Shure wireless systems. The 4188 has a comfortable fit and its directional pickup pattern focuses on the subject while rejecting sound from the back and sides for improved intelligibility. Designed for both spoken word and vocal performance, the 4188 with DPA's CORE technology exhibits extremely low distortion, a wide dynamic range, and the ability to handle up to 144 dB SPL (Sound Pressure Level). DPA's reputation for crafting rugged microphones is legendary, and the 4188 is no exception. Covered by a 2-year warranty and carrying an IP58 dust and water ingress rating, the 4188 was built for performance, shying away from nothing to deliver precisely what you want to hear.

DPA Applications:

• Theater
• Lecture
• House of worship
• Corporate presentations
• Vocal performance

DPA Features:

• Pristine audio quality
• Lightweight and flexible
• Easy mounting to the left or right
• Minimal visual impact
• Resistant to humidity

DPA Specifications:

• Directional pattern: Cardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in): 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range - Legacy: Typ. 95 dB
• Dynamic range - CORE: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principleSignal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: TA4F
• Color: Black
• Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Cable length: 1.3 m (4.3 ft)
• Cable color: Black, beige or brown
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Electromagnetic compatibility (EMC): Fully compatible
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%