CAD Audio E100SP Studio Pack with E100Sx, CX2, AS10, VP1, and CLC25

Create an instant vocal studio with the CAD Audio E100SP Studio Pack. Built around CAD's CX2 USB interface and E100Sx large diaphragm condenser mic, this kit includes everything you need to capture studio-quality vocal tracks out of the box. You also get the AS10 acoustic isolation enclosure, a pop filter, and a premium 25' XLR cable to complete your bundle. The E100Sx features a large diaphragm with a supercardioid pickup pattern that captures the nuance of the source while rejecting ambient noise from the back and sides. An integrated high-pass filter removes low-end noise at input and a -10dB pad gives the mic a 136 maximum SPL level making it perfect for everything from a mandolin to a screaming Marshall (all sold separately). The CX2 features two XLR/1/4" combo inputs with phantom power, rear-panel line outputs for powered monitors (sold separately), and a headphone jack with dedicated volume control for alternate or on-the-go listening capabilities. A high-resolution 24-bit/96kHz audio engine and USB power mean you'll capture studio-grade tracks wherever you are without searching for an outlet. The AS10 shield reduces unwanted room reflections, echo, and other annoying acoustic artifacts that reduce the warmth and intelligibility of your vocal and dialog tracks, while the pop filter keeps plosives and hard consonants from compromising that perfect take!

CAD Audio E100SP Includes:

• E100Sx large diaphragm condenser mic
• CX2 2x2 USB Audio Interface
• AS10 Acoustic Enclosure
• VP1 Pop Filter
• CLC25 Premium XLR mic cable (25')

CAD Audio E100SP Features:

• Turnkey recording solution
• E100SX large diaphragm condenser mic
• Two XLR/1/4" combo jacks with pantom power
• High-resolution 24-bit/96kHz audio engine
• USB-powered
• 136 dB SPL microphone
• Includes isolation shield and pop filter

CAD Audio E100SP Specifications:

• E100Sx
  • Operating Principle: Condenser
  • Polar Pattern: Supercardioid
  • Frequency Response: 20Hz -18KHz
  • Sensitivity: -32dBV (25mV) @ 1 Pa
  • Impedance: 150 ohms
  • Max SPL: 136dB (with pad engaged)
  • Self Noise: 9.5dBA
  • High Pass: 100Hz, 6dB/oct
  • Dimensions
  • Without shock mount attached (mic only)
    • 6.0625" (15.4cm) tall
    • 2.245" (5.7cm) wide
    • 1.990" (5.05cm) deep
  • With shock mount attached
    • 6.0625" (15.4cm) tall
    • 2.903" (7.37cm) wide
    • 5.4375" (13.81cm) deep
  • Power Requirements: P48, 1.6mA
  • Weight: 1.98lbs [0.9Kg]
  • RoHS: Compliant
• CX2
  • Frequency Response: 20Hz – 20kHz
  • Resolution/Sample Rate: 24Bit/96kHz
  • Phantom Power: +48V
  • Dynamic Range: 118dA
  • EIN: -110dBA
  • Max Input Level:
  • Mic: +8dBu
  • Instrument: +11dBu
  • Line: +19dBu
  • Input Impedance
  • Mic: 3k ohms
  • Instrument: 1M ohms
  • Line: 20k ohms
  • Gain Range: 50dB
• AS10
  • Individual Dims: 8.375” x 13” (21.3cm x 33cm)
  • Individual Weight: 1.65Lb