Crestron DM-NUX-R2-1G DM NUX USB over Network Wall Plate with Routing, Remote

Enables the extension and routing of USB 1.1 or 2.0 devices over an Ethernet network or point-to-point using a single CAT5e (or better) shielded twisted pair cable. Enhances the USB routing capabilities of a DigitalMedia™ system, incorporating virtual hub functionality. Designed for mounting to a 1-gang electrical box.

Extends the reach of any USB 1.1 or 2.0 device up to 330 ft (100 m) point-to-point over a single CAT5e (or better) unshielded twisted pair cable.

Crestron DM-NUX-R2-1G Features:

• Provide reliable, high-speed USB signal extension for most USB 1.1 or 2.0 devices
• Compatible with Crestron® USB over Ethernet Extenders with Routing (DM-NUX-L2 and DM-NUX-R2)
• Supports Virtual Hub capabilities with up to five DM‑NUX‑R2‑1G endpoints
• Allow simple, point-to-point USB extension up to 330 ft (100 m) over CAT5e (or better)
• Power over Ethernet (PoE)
• Enable USB signal routing under the control of a Crestron control system or DigitalMedia™ system
• Mount in an unobstructed North American 1-gang electrical box (not included)
• Plug-and-play compatible with most types of USB 1.1 and 2.0 devices and hosts
• No drivers required with Windows®, macOS®, or Linux® operating systems
• Transport USB over Ethernet or CAT5e at speeds up to 480 Mbps
• Mass Storage Acceleration maximizes USB 2.0 bulk transfer speeds
• Expandable using up to 4 USB hubs (not included)
• DM‑NUX‑R2‑1G provides 4 USB Type A ports
• Expand upon the USB-HID routing capabilities of a DigitalMedia™ system without additional wiring
• Add USB host or device ports to any DM® transmitter, receiver, or switcher
• USB local (host) or remote (device) endpoint sold individually for maximum flexibility

Crestron DM-NUX-R2-1G Specifications:

• Communications:
  • Ethernet: 100Base-T or 1000Base-T, Layer 2
  • LINK Speed: Up to 480 Mbps, dependent upon network speed and quality
  • USB Device Support: USB 1.0/1.1 and 2.0 with Hub compatible including isochronous devices
  • USB Hub Support: Any signal chain may include up to 4 USB hubs plus one DM‑NUX‑L2‑1G and one DM‑NUX‑R2‑1G
  • Maximum USB Devices: 30 USB devices, or 4 USB hubs with 26 USB devices
  • Host Computer OS Support: Windows®, macOS®, and Linux® operating systems
  • USB Throughput: USB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps
• Connectors – Local endpoint:
  • 24 V 0.75 A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input
  • CONFIG: For factory use only
  • LINK: (1) 8-pin RJ‑45 connector, female; Connects to an Ethernet network or directly to a Remote endpoint
    • IEEE 802.3Af
  • USB: (1) USB Type B connector, female; USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc.
• Connectors – Remote endpoint:
  • 24 V 0.75 A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input
  • CONFIG: For factory use only
  • LINK: (1) 8-pin RJ‑45 connector, female; Connects to Link port on the Local endpoint
    • IEEE 802.3Af
  • USB: (4) USB Type A connectors, female; USB 2.0 host ports for connection of USB devices such as mice, keyboards, and other USB devices
• Indicators – Local endpoint:
  • ACT: (1) Amber LED, indicates data activity over the LINK connection
  • HOST: (1) Green LED, indicates a valid connection to the USB host
  • LINK: (1) Green LED, indicates a valid LINK connection to the Remote endpoint
  • PAIR: (1) Pushbutton, used to establish a connection with a Remote endpoint
  • PWR: (1) Blue LED, indicates operating power is supplied via the USB host
• Indicators – Remote endpoint:
  • ACT: (1) Amber LED, indicates data activity over the LINK connection
  • HOST: (1) Green LED, indicates a valid connection to the USB host at the Local endpoint
  • LINK: (1) Green LED, indicates a valid LINK connection to the Local endpoint
  • PAIR: (1) Pushbutton, used to establish a connection with a Local endpoint
  • PWR: (1) Blue LED, indicates operating power is supplied via the power supply
• Power:
  • DM‑NUX‑L2‑1G: USB powered via the USB host interface; IEEE 802.3Af Powered device; An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).
  • DM‑NUX‑R2‑1G: Input: 100-240VAC, 50/60 Hz; Output: 0.75A @ 24VDC; IEEE 802.3Af Powered device; An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).
• Environmental:
  • Temperature: 32° to 122°F (0° to 50°C)
  • Humidity: 20% to 80% RH (non‑condensing)
• Enclosure:
  • Construction: Metal, black finish with white or black polycarbonate label overlay
  • Flush Wall Mount: Mounts in an unobstructed North American 1-gang electrical box (not included); FP-G1 series decorator style faceplate (not included)
• Dimensions:
  • Height: 4.12 in. (105 mm)
  • Width: 1.72 in. (44 mm)
  • Depth: 1.95 in. (50 mm)
• Compliance:
  • IC, FCC Part 15 Class B digital device