Product Overview
The AVN-CU2 introduces a versatile, multi-functional tool for commentary teams, featuring a powerful mix engine that enhances standard Dante® Controller settings. After establishing Dante® flows, it allows for flexible mixing of AoIP and physical inputs/outputs. With programmable buttons and rotary encoders to adjust gain and pan, it offers comprehensive control and adaptability for various scenarios.
Sonifex AVN-CU4-DANTE Specifications:
- Network and AoIP:
- AoIP Standard: Dante
- Number of Channels: 16 receive, 16 transmit
- Number of Streams: 16 receive, 16 transmit
- Sample Rate: 48 kHz
- Format: Linear PCM, 16, 24 or 32 bit
- AES67 Support: Yes
- Connectivity: 2 x RJ45 and 2 x SFP
- Speed: 1Gbps or 100Mbps
- Network Modes: Switched or redundant
- Dante Domain Manager Ready: Yes
- Mic/Line Inputs:
- Input Impedance (Mic Mode): 2.5kΩ electronically balanced
- Input Impedance (Line Mode): >10kΩ electronically balanced
- Preamp Gain (Mic Mode): User selectable 16dB to 76dB in 3dB steps (Ref. +18dBu = 0dBFS)
- 0dBFS Line-up (Mic Mode): -58dBu @ Max preamp gain, +2dBu @ Min preamp gain
- 0dBFS Line-up (Line Mode): User selectable +15dBu / +18dBu / +20dBu / +22dBu / +24dBu = 0dBFS
- Frequency Response (Mic Mode): +0/-0.2dB 20Hz to 20kHz Ref 40dB gain @ 1kHz
- Frequency Response (Line Mode): +0/-0.2dB 20Hz to 20kHz Ref 0dBu @ 1kHz
- THD+N (Mic Mode): Less than -90dBFS, -64dBFS, 20Hz – 20kHz, 40dB gain, 20kHz BW
- THD+N (Line Mode): Less than -98dBFS, -30dBFS, 20Hz – 20kHz, 20kHz BW
- Equivalent Input Noise (Mic Mode): 125dB Ref. 76dB preamp gain, Rs = 200Ω
- Noise (Line Mode): Less than -100dBFS, 20kHz BW, Rs = 200Ω
- C.M.R.R.: >60dB @ 1kHz
- Phantom Power (Mic Mode): +48V
- High Pass Filter: 12dB/octave, user selectable frequency
- Stereo Analogue/Digital Input:
- Input Impedance (Analogue Mode): >20kΩ electronically balanced
- Input Impedance (Digital Mode): 110Ω
- Supported Input Rates (Digital Mode): 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz
- 0dBFS Line-up (Analogue Mode): User selectable +15dBu / +18dBu / +20dBu / +22dBu / +24dBu = 0dBFS
- Frequency Response (Analogue Mode): +0/-0.2dB 20Hz to 20kHz Ref 0dBu @ 1kHz
- THD+N (Analogue Mode): Less than -107dBFS, -30dBFS, 20Hz – 20kHz, 20kHz BW
- Noise (Analogue Mode): Less than -108dBFS, 20kHz BW, Rs = 200Ω
- C.M.R.R (Analogue Mode): >60dB @ 1kHz
- Stereo Analogue/Digital Output:
- Output Impedance (Analogue Mode): Less than 50Ω
- Output Impedance (Digital Mode): 110Ω
- Supported Output Rates (Digital Mode): 48kHz
- 0dBFS Line-up (Analogue Mode): User selectable 0dBFS = +15dBu / +18dBu / +20dBu / +22dBu / +24dBu
- Frequency Response (Analogue Mode): +0/-0.5dB 20Hz to 20kHz Ref 0dBu @ 1kHz
- THD+N (Analogue Mode): Less than -107dBFS, -30dBFS, 20Hz – 20kHz, 20kHz BW
- Noise (Analogue Mode): Less than -107dBFS, 20kHz BW
- Headphone Outputs:
- Drive Capability: Drives 150mW into 32Ω to 600Ω headphones
- 0dBFS Line-up: Fixed 0dBFS = +18dBu
- Frequency Response:
- +0/-0.2dB 20Hz to 20kHz
- Ref 0dBu @ 1kHz
- THD+N: Less than -107dBFS, -30dBFS, 20Hz – 20kHz, 20kHz BW
- Noise: Less than -110dBFS, 20kHz BW
- Main Panel Operational Controls & Indicators:
- Power LED Sonifex logo illuminates when power is present
- Pushbuttons: 12 x Illuminated buttons that can be assigned to any of the following functions, and configured: On-Air / Talkback / Page # / Page Cycle / GPO / Cough / Menu / Brightness
- Display: 480 x 107 pixel colour TFT display showing pan status, level, metering, control type, source/mix/destination names and main output metering
- Status LEDs: Clock / AoIP status / PoE status and PSU status LEDs to monitor power and connectivity. Can be disabled if required
- Rotary Encoders: 6 x robust soft touch rotary encoders with adjacent configurable light bars for group/source/commentator grouping and identification
- Front Panel Connections:
- Headphone Outputs: 2 x Neutrik ¼” (6.35mm) locking jack sockets
- Microphone/Line Inputs: 2 x Neutrik 3 pin latching XLR sockets
- Rear Panel Connections:
- Stereo Analogue/Digital Input: RJ45 socket (electronically balanced)
- Stereo Analogue/Digital Output: RJ45 socket (electronically balanced)
- GPIO Port: 15-way ‘D’-type socket
- Network:
- 2 x 1Gbps Neutrik EtherCON receptacles, with PoE
- 2 x SFP slots for alternative interfaces
- DC Input: Neutrik 4 pin XLR plug, 12VDC, Maximum 12W
- PoE Power:
- Standard: 802.3af
- Class: 0
- PD Power Range: 0.44 W to 12.94 W
- Typical PSE Power Usage: 13 W
- Max PSE Power Usage: 15.4 W
- Equipment Type:
- AVN-CU2: Dante® Commentator Unit, 2 Commentators
- Physical Specification:
- Dimensions (Raw): 13.5cm (W) x 23cm (D) x 9.0cm (H - rear) 6.6cm (H - Front) 9.3cm (H - Maximum), 5.3” (W) x 9” (D) x 3.5” (H - front) x 2.6” (H - rear) 3.7" (H - Maximum)
- Dimensions (Boxed): 30.5cm (W) x 21.5cm (D) x 16.3cm (H), 12" (W) x 8.5" (D) x 6.4" (H)
- Weight: Nett: 1.8kg Gross: 2.1kg, Nett: 3.96lbs Gross: 4.62lbs
- Accessories:
- AVN-DCX60: DC Power Supply for AVN Range, 4 pin XLR socket, 60W
- AVN-TC1 (Case Only): Transport Case, AVN-CU2-DANTE & Power Supply Cut-out
- CM-GM2: Professional Gooseneck Condenser Microphone