Clear-Com HXII-KB-X4 4-Gang HelixNet Speaker Station, Flush Mount, XLR4M Connector (Formerly HKB-2X)

Featuring an intuitive front panel with an OLED display and backlit keys, the HXII-BP beltpack is a versatile two-channel intercom user station that promises ease of use and rock-solid reliability. It offers assignable keysets and stacked keys for unique channel combinations, independent Program Audio control, and a USB call signal flasher. The HXII-BP-X5 model includes binaural controls for enhanced audio management. Connectivity options include an Ethernet Network port with PoE1 and powerline via an XLR cable. The rugged, lightweight polycarbonate enclosure offers multiple mounting options and an IP53 environmental rating, making it durable and adaptable. Part of the HelixNet System, the HXII-BP supports up to 24 licensed channels and up to 128 endpoints, with effortless management through CCM browser configuration, fast front panel control, central discovery and pairing on Arcadia, plug-and-go powerline, and centralized firmware upgrades

Clear-Com HXII-KB-X4 Features:

• Easy to use front panel with OLED display & backlit keys
• 2 Keysets assignable to channels
• Stacked keys allow unique combination of channels
• Independent Program Audio control
• USB call signal flasher
• Binaural controls on HXII-BP-X5

Clear-Com HXII-KB-X4 Specifications:

• Connectors
  • XLR Powerline: 3-pin XLR-F
  • LAN/PoE1: RJ45 etherCON
  • Headset: 4-pin XLR-M (-X4) or 5-pin XLR-F (-X5)
  • USB: Micro AB
  • Microphone Pre-Amplifier
  • Headset Mic Impedance: 200Ω (Dynamic)
  • Headset Mic Voltage: 1.7V (Electret selectable)
  • Limiter: +23dB
  • Route to 4-wire output at 0dBu out:
  • Mic Gain: 60dB (Dynamic), 45dB (Electret)
  • Frequency Response: 300Hz – 10 kHz ± 3dB, contoured for intelligibility
  • Distortion:
• Noise:
  • Headphone Amplifier
  • Load Impedance: >32Ω
  • Output Level: +12dBu before clipping
  • Sidetone: -12dB (selectable)
  • Route from a 4-wire input at 0dBu in:
  • Max Gain: 0dB
  • Frequency Response: 40Hz - 10kHz ±3dB
  • Distortion:
  • Noise: -65dBu
  • Headphone Limiter: 0dB (selectable)
• Device Power
  • Voltage: 48V DC
  • Current (Max): 0.09A
  • Power (Max): 4W
  • BTU (Max): 13BTU/hr
  • This unit can be powered via:
    • PoE - Power over Ethernet: IEEE 802.3af-2003 - Class 1
    • PSE: 4.0W DC max @ Power Source Req.
    • PD: 3.84W DC max @ Powered Device Draw
  • Powerline:
    • Input Voltage: ±29.5V DC
    • Input Current (Max): 0.13A
  • Powerline Utilization:
  • HXII-BP = 1 beltpack
  • Note the maximum Powerline capacity of the HXII-DPL & HMS-4X
  • Use HelixNet Cable Calculator to validate load and cable distance.