Accessories, Capsules for Wireless

The Shure UA505-RSMA is a paintable wall mount. It works with PA805-RSMA and GLX-D® Advanced.

The XSW-FRONT-ANT-CAB is the antenna mounting kit for the XSW system. It contains two antenna front mount cables and includes two BNC coupler bulkheads.

Shure's SB910 is a Lithium-Ion Rechargeable battery made to power ADX1 bodypack transmitters (sold separately).Note: ADX1 bodypack transmitters exclusively use SB910 lithium-ion rechargeable batteries.

RTS' MCp-2 is a rackmount kit for one main (modular style) component. Mounting brackets are the key to the RTS modular user station design concept. By choosing the appropriate mounting kit individual user stations can be combined in numero ...

The UA874US Directional Antenna delivers improved wireless signal reception for VHF and UHF wireless systems. Features include rejection of RF signals outside the coverage area and an integrated amplifier with four gain settings. UA874 use ...

1/4 wave belt pack antenna - TR700/800 Telex. 636-726 MHz.

The Heil Sound RC 22 is a replacement microphone capsule for wireless transmitters and uses the same internal elements as the PR 22. The RC 22 gives you all the great mids and highs, great articulation, high rejection of side and rear nois ...

The energy pack BA20 is needed to power portable receiver Sennheiser EKP AVX. It provides a micro USB port and can be charged with the corresponding cable via a computer or with a USB power supply unit. Note: This product may only be shipp ...

This durable beige Kevlar-core 4.2' Microphone Cable for Earhook Slide from DPA Microphones is equipped with a locking 3.5mm connection and is designed exclusively for use with your DPA wireless headset microphones. Enjoy the freedom of mo ...

Locking Bodypack Adapter for TQG Connector for UHF-R UR1 Bodypack Transmitter

This padded canvas cover is for RF Venue's Diversity Fin series and is made to protect this "shark finned" unit from the elements and being handled during transport.

Extend the range of your current wireless system with the VocoPro Boost antenna amplifier system. Boost compensates for signal loss typical of long antenna cable runs by increasing the signal strength by +15dB thus extending your line of s ...

The DAD6032 MicroDot to TA4F Adapter from DPA Microphones is designed for use with DPA miniature headset, lavalier, and instrument microphones. This convenient adapter helps you easily reconfigure select Beyerdyn, OPUS, and Mipro wireless ...

Unlike earsets that are hard-wired from the mic to the connector, this cable from Countryman will quickly and securely snap into the E2 Earset to link the mic to hardwired or wireless systems. That means you can replace a worn cable at a f ...

A passive antenna splitter kit, Electro-Voice's PASP contains the items necessary when splitting and sharing 2 incoming antenna signals between the diversity antenna jacks of 2 receivers. An ideal companion kit to EV'sRMK2 dual-rack kit (s ...

The Sennheiser EW-D CHARGING SET is a 2-battery/charger set for use with Sennheiser EW-D SK and EW-D SKM Digital Wireless Transmitters. The EW-D Charging Set includes one L-70 USB charger, two BA 70 lithium-ion batteries, and a NT 5-20 UCW ...

4-pin mini connector (TA4F) adapts small-diameter microphone cable to the T1, T11, LX1, SC1, or U1 body-pack transmitter.

Shure's UA400B is a 1/4 wave antenna for use with their SLX4, U4S, U4D and UC4 receivers. 470-752 mHz covers UB frequency range.

UHF flexible whip antenna with straight BNC connector. 470-608 mHz. For use with UHF wireless receivers.

The TELEFUNKEN Elektroakustik M80 Dynamic microphone has rapidly become a new standard for live performance and stage use. The microphone features a low-mass capsule built with a super thin Mylar membrane that is coupled with our propriety ...

This lightweight but durable black 2.2mm Kevlar-core Extension Cable from DPA Microphones is perfect for giving you more flexibility both in studio and live performance environments. The ends of the cable terminate in female and male Micro ...

This lightweight but durable black 1.6mm Kevlar-core Extension Cable from DPA Microphones is perfect for making you more mobile in both studio and live performance environments. Both ends of the cable terminate in MicroDot connectors to ex ...

Countryman E6CABLEL2-AT-CH E6 Cable for AT, 2mm Light Beige The E6CABLEL2ATCH is a replacement cable for the Countryman E6 series earset microphones. It has a 2mm cable thickness and is terminated with a Hirose 4-pin screw-down CH-style co ...

Unlike earsets that are hard wired from the mic to the connector, this cable from Countryman will quickly and securely snap into the E6 Earset to link the mic to hardwired or wireless systems. That means you can replace a worn cable at a f ...

The H6 Headset Headframe provides a secure and comfortable fit on the head; compatible with both omni and directional H6 models.

The H6 Headset Headframe provides a secure and comfortable fit on the head; compatible with both omni and directional H6 models.

The WA301 Water Resistant Cover for SLXD5 is an essential protective accessory designed to safeguard the SLXD5 Portable Receiver from moisture and environmental elements. Crafted with durable materials, this cover shields the receiver, ens ...

Bringing a stronger signal to your wireless receiver, the Bogen UHFASA antenna signal amplifier applies a 360-degree coverage angle and 10 dB of added gain to transmitted signals. The result is stronger transmission and improved audio from ...

The LARK MAX Clip Magnet is an innovative magnetic accessory specifically engineered for wireless transmitter clips. This technologically advanced magnet provides a secure and reliable attachment mechanism for wireless transmitters during ...

Antenna Coax Cable (lengths). Pre-cut lengths of premium grade RG/58U-50-O with molded BNC plugs. Specifications Construction: RG/58U O cable with molded BNC plugs Length: 1’

Low loss RF antenna cable, 25 ft with BNC connectors. Specifications Connectors: BNC Length: 25'

A handy docking station for the AR2 receiver provides a USB DC input and a 3.5mm balanced audio output. NOTE: Dock only. Receiver and transmitter sold separately. AR2 Dock Features: Provides secure base for AR2 receiver during operation an ...

Premium 1/4"-to-TA4F guitar cable with locking thread connects the GLXD1 Bodypack Transmitter to a guitar or bass. For use with GLX-D Digital Wireless Systems.

The HE2F8P is a small beige dual-ear headset mount for DPA 4166, 4266, 4188, and 4288 headsets that can be used as a replacement for a damaged mount or to change from a single-ear to a dual-ear mount. The HE2F8P is lightweight and fully ad ...

Point Source Audio's R-DMC-BE is their beige reversible deal earset clip. Can be used to orient the mic to the left or right side of the face. Compatible with Point Source Audio's CO-3, CO-5, CO-6, and CO-7 microphones.

1/4 Wave Antenna for U4S, U4D and UC4 Receivers, 774-862 MHz Covers UA Frequency Range

The CMX2218B00 MicroDot Extension Cable for the Table Shock Mount by DPA Microphones allows the SC4098-M to fit any 19mm podium or table mount. This cable is compatible with any DPA adapter for wireless systems.

Audio Technica offer their RG8X1.5-10 Premium BNC Interconnect Cable. This RF Venue Certified Interconnect Cable offers improved system performance when used where cables may be in close proximity, especially inside equipment racks. The RG ...

The Shure WA617M is a Radome color ID kit for Axient® Digital handheld transmitters. Includes Black Blue Green Red White Yellow

Unlike earsets that are hard-wired from the mic to the connector, Countryman's cables quickly and securely snap into the E6/E6i earset to link the mic to the wireless system. That means you can replace a worn cable at a fraction of the cos ...

Countryman's E6CABLEL1 cable for their E6 earset microphone quickly and securely snap into the E6 Earset to link the microphone to a hardwired systems. E6 cables and E2 cables are NOT interchangeable. Features: Cable Diameter: 1mm aramid-r ...

Cable for all compatible AMT mics to the AR40 pre amp. Works with mics such as the M40, S25B, S18C and others.

Made out of solid aluminum, this unobtrusive device lets you match your favorite microphone sound with your favorite wireless handheld. The adapter allows to mount heads for the Shure® UR series such as the most poular SM 58 and Beta 87 t ...

The EW-D Color Coding Set consists of 3 separate sets of magnetic color indicators providing quick and easy visual pairing identification. Sennheiser EW-D-COLOR-CODE Includes: 1x EW-D SK Color Coding Set for the EW-D-SK Digital Body Pack T ...

The DAD6017 MicroDot to TA3F Adapter from DPA Microphones is designed for use with DPA miniature headset, lavalier, and instrument microphones. This convenient adapter helps you easily reconfigure select AKG or Samson wireless setups durin ...

The DAD6021 MicroDot to TA5F Adapter from DPA Microphones is designed for use with DPA miniature headset, lavalier, and instrument microphones. This convenient adapter helps you easily reconfigure your Lectrosonics UHF or ATW-T101 wireless ...

Maintain the value of your equipment and keep it up-to-date with the DAD3056 MicroDot to TA5F Adapter by DPA Microphones. Attach your low DC microphone with a standard TA5F Switchcraft Adapter - type 4063 and 4067 - to your MicroDot wirele ...

The Shure RK379 is a replacement kit with one clip and two foam windscreens for use with the Shure SM31FH Headset Microphone.

The E19CD is an Equitek E19 replacement cable from CAD Audio as an option for their E19 miniature earworn headmic. It features a TA4F connector that is designed to be used with the CAD Audio wireless bodypack transmitter (sold separately). ...

Shure's SBM910 charges two SB910 Rechargeable Batteries within the SBRC Shure Battery Rack Charger (sold separately). Configurable bays in the SBRC allow for mixing and matching of up to four charging modules, for a total of eight batterie ...

Dual docking recharging station charges two SB903 lithium-ion batteries in or out of their transmitters. Built to charge two batteries, two body pack transmitters, two handheld transmitters or any pairing of two SLX-D transmitters or SB903 ...

The FA-GW-RS is a 1/2 Waveflex Antenna, 610-710MHZ.

The FA-RW-RS is a 1/2 Waveflex Antenna, 470-550 MHZ.

The FA-BW-RS is a 1/2 Wave Flex Antenna in the frequency range of 710-880 MHZ.

The E6 Earset (sold separately) features a unique snap-in-place cable design, making it easy to position and care for your microphone or replace the cable when needed. The E6CABLET1-AT-CH comes with a 4-pin screw-down cH termination on a 1 ...

The EarSet should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The microphone is specifically designed for use with a cap in place. The cardioid cap is slightly less ...

The Shure WA615M are Multi-Colored Handheld Transmitter ID Rings for T, UT, LX, ULX, QLXD and UC Wireless Systems. Colors Included: White Blue Yellow Orange Red

Unlike earsets that are hard-wired from the mic to the connector, this cable from Countryman will quickly and securely snap into the E2 Earset to link the mic to hardwired or wireless systems. That means you can replace a worn cable at a f ...

The On-Stage RFM1210 Antenna Rack Mount fits any standard 19" 1U rack and includes (6) 3 ft 50 Ohm BNC cables, (2) copper signal splitters and (2) 40 x 8 cm hook and loop strips. On-Stage RFM1210 Antenna Rack Mount Features: Fits any stand ...

A pair of high quality, low-loss coax cables, the CXUF from Electro-Voice is intended to relocate a wireless receiver’s antenna input jacks to the front panel of a 19" rack. Included are threaded flange-mount connectors that are designed ...

Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that con ...

SB903 rechargeable lithium-ion batteries unlock real-time battery life and battery health features for SLX-D Digital Wireless transmitters. Note: This product may only be shipped to destinations within the contiguous United States, in acco ...

Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that con ...

Unlike earsets that are hard-wired from the mic to the connector, Countryman's cables quickly and securely snap into the E6/E6i earset to link the mic to the wireless system. That means you can replace a worn cable at a fraction of the cos ...

The H6CABLEL-SR is wired with a 3.5mm locking connector for the Sennheiser Evolution Series, EW100, EW300, EW500, G2, G3, SK 1093 bodypack transmitters. The H6 Headset Snap-On Cables allow you to interface your H6 Omni or Directional Heads ...

Countryman's H6CABLEL-AT is a headset snap-on cable for the Audio-Technica T27, T31, T51, T200, T210, T300, T310, 1100 Series, 1400 Series, 2000 Series, 3000 Series body pack transmitters. The H6 Headset Snap-On Cables allow you to interfa ...

The Neutrik NEU-NXPA9360125 is a 5 GHz antenna 9 dBi with 360°H 12.5°V coverage.

The Shure UA8-174-216 is a 1/4 wave receiver antenna.

The Shure UA600 is a front mount antenna kit for Model U4S, U4D and UC4 UHF wireless receivers. What's in the Shure UA600 Box: 2 bulkhead adapters 2 1/2” internal-tooth lockwashers 2 1/2-28 hex nuts 2 RG-58/U antenna cables

Dual post tie clip for MKE platinum, MKE2, MKE102 AND MKE104. Premium grade clip for ME2 and ME4 (optional) Since we use essentially the same cable diameter on all of our lavaliers (except the new MKE Platinum), the MZQ222 and MZQ222-NI wi ...

Unlike earsets that are hard-wired from the mic to the connector, this cable from Countryman will quickly and securely snap into the E6 Earset to link the mic to hardwired or wireless systems. That means you can replace a worn cable at a f ...

The Shure UA802-RSMA is a 2' Reverse SMA Cable for GLX-D® Advanced Digital Wireless Systems.

The Sennheiser SKM-MIC-BAG is a pouch with zipper made especially for any SKM Evolution Series Handheld mic/transmitter model (sold separately).

The Shure WA712 is a colored handle for the BLX wireless handheld transmitter with the PG58 microphone capsule. Choose from Pink, Red, Silver, Gold, Blue, and White. NOTE: Images shown above are for illustrative purposes only; actual produ ...

The Shure WA713 is a colored handle for the BLX wireless handheld transmitter with the SM58 microphone capsule. Choose from Pink, Red, Silver, Gold, Blue, and White. NOTE: Images shown above are for illustrative purposes only; actual produ ...

Audio-Technica's AT8630 is a joining-plate kit for 2000 and 3000 Series receivers. It enables the mounting of 2 receivers in a single 19" rack space.

The EarClip cable hook attaches to the back of the EarClip to position and secure the E6 Snap On cable. EarClip cable hooks are sold individually; please specify cable diameter and color.

This TA4F to 1/8" stereo phone cable adapter, when used with conjunction with an Anchor Audio wireless beltpack transmitter, can send audio signals to a wireless microphone receiver. Note NOT FOR USE with Shure products, and it may need an ...

The NT-12-5-CW replacement power supply for the Sennheiser EW-D EM Digital Wireless Receiver. Sennheiser NT-12-5-CW+ Specifications: Input Voltage: 100-240VAC 50/60Hz Output: 12VDC @ 500mA

The WA311 Non-Conductive Camera Adaptor for the SLXD5 Portable Receiver is a versatile accessory designed to facilitate easy integration of the receiver into camera setups without the risk of electrical interference. Crafted with non-condu ...

Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that con ...

Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that con ...

This standard RG58 BNC extension cable measures at 25 feet long, perfect for sending signal from a front-mounted antenna connector (such as the Galaxy Audio CN-BNCPM, sold separately) to a directional antenna paddle like Galaxy Audio's ANT ...

The UA8-2.4-5.8 dual band 45º omnidirectional antenna is designed for use with Shure GLXD4R+ rackmount wireless receivers and the GLXD+FMDB Frequency Manager (sold separately).

The Shure UA506 is a rackmount kit for mounting a single ULX receiver in to a standard 19" rack.

UHF flexible whip antenna with right angle BNC connector (470 - 608 MHz). These antennas can be used one block above and below the specified block. Color coded tip per ANSI resistor code.

This antenna is designed for use with VocoPro's VHF-3005 dual channel VHF wireless microphone system.

UHF Whip Antenna with Right Angle BNC Connector, Block 944 (944.1-951.9 MHz)

Sennheiser's 508651 is a Hot Shoe Camera Mount designed to securely hold an XSW-D receiver.

The LARK MAX USB-C to Lightning Cable is a meticulously engineered cable tailored for the precise needs of wireless lavalier microphone systems. Leveraging cutting-edge USB-C and Lightning technologies, this cable ensures rapid and dependa ...

The LARK MAX Furry Windshield is a technologically advanced microphone windshield meticulously designed to enhance wind noise reduction in wireless lavalier microphone systems. It effectively minimizes the interference caused by wind and e ...

The Shure UA8-174-216 is a 1/4 wave receiver antenna. This is a Restock item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales ...

Replacement stainless wire belt for LM and IS400-Type transmitters.

Anit-roll sleeve for HH Transmitter

Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that con ...

The EarSet should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The microphone is specifically designed for use with a cap in place. The cardioid cap is slightly less ...

Countryman Omnidirectional Earsets' protective cap's frequency response meets the needs of the majority of users, providing a slightly increased response in the 15 kHz range. This will boost the perceived amount of presence in your sound, ...

Countryman Omnidirectional Earsets' protective cap's frequency response meets the needs of the majority of users, providing a slightly increased response in the 15 kHz range. This will boost the perceived amount of presence in your sound, ...

Sony's BATC2AA is a UWP AA battery holder for their UTX-B2V, UTX-B2X, and URX-P2. Compatible with new UWP models including UWP-V1, UWP-V2, UWP-V6, UWP-X7, UTX-B2V, UTX-B2X and URX-P2 Also compatible with DWL-01 and WL-800 series models inc ...

The Point Source Audio CON-XLR is a line level converter for use with Shure microphones. Adapts a Shure TA4F to XLR for use when a direct XLR connection is needed or preferred. Phantom power is required for operation using this adapter. Th ...